Quantcast
Jump to content


T Boss 410 beeps in 2wd and 4wd

Paul R

By Paul R
in Massimo UTV SxS Forum

 Share

Recommended Posts

Paul R Rookie

Paul R

Posted
Posted

I have a Massimo 2020 T Boss 410 with 10 hours on it. When I have it in either 2wd or 4wd I get a beeping sound. Switching back and forth stops it but then after a few minutes it starts beeping again.  Any thought?? 

cliffyk Rising Star

cliffyk

Posted
Posted

I would first suspect the parking brake pedal position sensor--it signals the ECU to "beep" if any gear other than neutral is selected with the p-brake engaged...

  • 2 years later...
James Thomas Newbie

James Thomas

Posted
Posted
On 4/9/2021 at 9:44 AM, Paul R said:

I have a Massimo 2020 T Boss 410 with 10 hours on it. When I have it in either 2wd or 4wd I get a beeping sound. Switching back and forth stops it but then after a few minutes it starts beeping again.  Any thought?? 

 

James Thomas Newbie

James Thomas

Posted
Posted

Mine does same thing. Looking every where for answers. None yet. Talked with someone from Saferwholesale, who I bought it from. That was a waste of time. He said he never heard of this problem. Nor did he seem to care. Suggested I contact a local massimo mechanic… really? Anybody know one in Ca?

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • ToughLuck
      2021 Massimo MXU 1000 Runs Rich
      By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
    • Joe Breaux
      2017 Massimo MSU500 Thermostat Malfunction
      By Joe Breaux
      Got a 2017 Massimo MSU500 UTV with thermostat malfunction.. hot light comes on in 4-5 minutes but radiator is ice cold... where exactly is it?  The hose neck on the head has nothing in it.  I was told it was down by oil drain plug.. only thing I see is water pump.. Is in inside pump housing?  Cant find any exploded diagrams that show it.. how to I remove it? any help would be appreciated
    • SteveS
      2021 Massimo MSU 800 will not run above 20 MPH
      By SteveS
      While driving the MSU 800, it runs good but it lately it will not go over 20 MPH. The side by side will hesitate when it reaches 21 MPH, but it will run good under 20 MPH. What is the issue?
    • Adrian Domingues
      2023 Massimo T-Boss 550
      By Adrian Domingues
      I have 31 miles on my new T-Boss 550. In order to start I put in nentural and the emerage brake on and push down on brake paddle, then trun ket and get nothing, with key still on I shift to reverase and the back to netural and it starts.  Anyone know what is happening.
      Thanks for your help
    • rdborra
      Bobcat 2200 dump bed relay pops fuse and stalls after warm
      By rdborra
      I had to remove the relay for the dump bed due to it popping the fuse for main key power. I have tried to find a short but nothing seems to out of normal. I also disconnected the dump motor and switch and still pops the fuse. Also, when the machine is warmed up i get about 5 to 10 of work out of before it stalls. Once I can get it to start again I have to use the choke to keep it running. 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...