Quantcast
Jump to content


Recommended Posts

Posted

Yea, got those in the floor too but wanted something up higher for larger loads.  Measured the openings on my dump bed and looks like 1 7/16" will work.  Going to order some off ebay and see, I found a set of 8 for only $29.

  • Like 1
Posted

Used to have a harness for my dog that the seatbelt went thru.  Got the strangest looks from people running down the road with the doors off the Jeep and him sitting in the front passenger seat😁

  • Like 1
Posted

we make our dog stay in back seat when we remove doors on our Sahara ... he also loves riding with top down on our Corvette .. Hell, he rides on our Honda 4 wheelers too.. if it moves, he'll ride on or in it 

  • Like 1
Posted
On 4/17/2021 at 10:37 AM, Joe Breaux said:

we make our dog stay in back seat when we remove doors on our Sahara ... he also loves riding with top down on our Corvette .. Hell, he rides on our Honda 4 wheelers too.. if it moves, he'll ride on or in it 

 

Her spot is up front and it's HER SPOT and HER SPOT ONLY!

20201201_170937.thumb.jpg.12fe35f8d10fd0b9515f805d7eb9e11d.jpg

Posted
7 hours ago, cliffyk said:

Here's "Spike" in his position--in action he's stuck to me like glue:

Spike-00.thumb.jpg.a82e6afdec1e92d903dd2df914423e0b.jpg

My Grandmother has a dog named Spike. Yorkie/Chihuahua mix. Weighs about 6 pounds soaking wet.

  • Like 1
Posted
3 hours ago, Joe Breaux said:

he reminds me of our Lhasa Apso , OREO, that passed 3 yeas ago.. he was 14..same coloring . wonderful dog ... now we have a terrier mix that thinks hes a Rotweiller 

IT is said you "cannot buy love", however that is not true--you can buy a dog. Best damned animal on the planet...

  • Like 1
Posted

I do not really have anything to "tie down", just stuff to keep fom sliding about and blowing out-so I installed a dozen or so small D-rings, rated @ 100 kg (220 lbs.) each--probably good for 100 lbs with the #10 self-tapping screws I used;

Tie-downs-01.thumb.jpg.1620ee13932d771c85307c0f299ab682.jpg

 

Tie-downs-02.thumb.jpg.74732d44b4adcced8805fa04763abae9.jpg

Got 20 of them from Amazon for $7.00--plenty good for a case of beer or an errant Shih-Tzu...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Found a NEW 2022 Bighorn 550 DX for $9K.   Any opinions on this machine????
       
    • By Ductking1
      I recently purchased a 2024 Hisun 550 Sector from Kreps Service Station and am having issues with the gear selector, I am doing as instructed in the owners manual but the shifter acts like it is binding or the button lock isn't releasing, the shifter will not move, I have to wiggle it back and forth while pushing hard on the brake and if it's in park or reverse it's nearly impossible to get it to move, I contacted Justin Krep and he says this is normal with these machines, I find that hard to believe, I've owned many utvs and side x sides and have never had this kind of issue with any of them, any help with this problem would be greatly appreciated.
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Gerald Mohs
      Is the cam sprocket a bolt removal or is it pressed on? Dang bolt is on tight. Impact wrench won't even move it.

    • By Cory J
      Belt started slipping when I used it in high gear. It works okay in low unless I'm trying to power it up a hill and then it slips.., Ordered a new belt and went to change it and found a good bit of oil in the belt housing. Has anyone experienced this? Belt looks fine. Only have 300 miles on this thing..
×
×
  • Create New...