Quantcast
Jump to content


New facelift 2015 Dominator

2wpuller

By 2wpuller
in ODES UTV SxS Forum

 Share

Recommended Posts

2wpuller Contributor

2wpuller

Posted
Posted

I am not a fan of the white carbon fiber look mine was well weathered from the previous owner. I was going to use good automotive paint the same we are going to use on my truck. But was just talk into using rattle can highgloss black that tutch up is easy. Only took 1 1/2 cans

Turned out just fine to run around on the trails with. Granted the whole project is all focused on a tight budget build. Just to prove don't have to spend alot of money to look decent. Definitely not going to go to a car. Lol

20210403_175558.thumb.jpg.bc6f2dd70b120384e11f6906d1473c20.jpg

2wpuller Contributor

2wpuller

Posted
  • Author
Posted

I also made new lenses for the original led front light. One was missing a lens . I made 2 new out of plexiglas so they match.i know you can see the electronics but they match and still are bright.

20210414_165733.thumb.jpg.97e547db48db965298dcc55d1da696ce.jpg20210414_165433.thumb.jpg.96fe852fcbe2211daf804ca32c2cbfc0.jpg

2wpuller Contributor

2wpuller

Posted
  • Author
Posted

I also replaced original seat with some from Jeg's for $69.95 each with covers. The padding isn't very much there. They do offer a extra added padding separate. I didn't get . I'll find something to use add more padding. They have side support so now I will not slide side to side on hills. They lay back more and are very comfortable. Well I think so. Longer bottom support for legs. They are 20"wide 2"wider than stock mounts on the stock mounting platform  just had to elongate the original 4 bolt holes. I didn't use the sliders. 20210412_112824.thumb.jpg.dcdac96672a3b1ffdc377eb0b45bd06f.jpg20210412_113223.thumb.jpg.6532e6336cc5a69f2bb1af9084108bf5.jpg20210412_112100.thumb.jpg.57220eca516bb7dc0e46cd21c85a6c60.jpg

2wpuller Contributor

2wpuller

Posted
  • Author
Posted

It didn't have a grille in her anymore when I got it. I thought I would try something with a different look. I used a piece of gutter screen I had laying around. And used some chrome stick on tape to make a outside grille shell. Just to see if we like it. Before I I machine a buillit aluminum one out and polish it.20210428_203729.thumb.jpg.9d90fdf099ddf6c3c4075b023d3a58a0.jpg20210426_194231.thumb.jpg.3e84bb0076783a45f26c9d6a32d0fe06.jpg20210426_125535.thumb.jpg.d94d120a5a7953419341b51ab2d1b68e.jpg

  • 8 months later...
2wpuller Contributor

2wpuller

Posted
  • Author
Posted

Made some lower rubber flares a couple odes dealers would never get the original ones in. So I gave up and just made some out of some conveyor belt scrapper material. Working out nicely rubbing up against rocks and trees on the trails been holding up great. And sure keep alot of the mud off the sides and off me.

And put a stainless coolant catch can on.

20210918_182640.jpg

20211212_172930.jpg

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Homeowner A
      Black O2 Sensor?
      By Homeowner A
      I've been having misfire issues with my UTV 400 when it gets warm and I've thrown all kinds of parts at it so far with no permanent resolution.  Today I removed the O2 sensor and it is black on the end.  To me that means it's running rich and/or the sensor isn't working.  I replaced the sensor with a new one and will see how it goes I guess.  With EFI, I'm wondering why the sensor would be this way with low hours and mileage?  Is there a way to adjust or lean out fueling on these?  Thanks in advance.  
    • FTG-05
      Want a new work UTV; who and what should I look for?
      By FTG-05
      I want to ditch my Kubota RTV-XG850 and its moronic twitchy throttle design flaw, get rid of the problematic engine and the 40 mph purposely throttled speed.
      So far, I'm looking at the Honda Pioneer 1000 and the Polaris Ranger 1000, both of which have 1000-1500 lb payload bed capacity.
      What other makes and models should I be looking at?
       
      Thanks for the help!
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • Bloodhound
      2016 can am commander
      By Bloodhound
      Don't know the size anyone know the reliability fo theae
    • Jim Kessell
      EH65 spitting fuel from breather hose into air filter.
      By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...