Quantcast
Jump to content


More 3d print parts and updated manual hs400

tsheh4

By tsheh4
in Hisun UTV SxS Forum

 Share

Recommended Posts

tsheh4 Contributor

tsheh4

Posted
Posted (edited)

Got a couple things folks, first off I uploaded some files to print a mount for auxiliary switches in the Coleman download section that requires no drilling the dash, as well as a mount for a slow moving vehicle placard on the tailgate. Also, when I emailed Coleman for my MSO I was able to get the rep to send me a current manual. The one that came with my buggy had an entirely different control layout than what is used ibn my model. 

 

Edited by Alex
Added link to files
  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Homeowner A
      Coleman UT 400 Grease Points?
      By Homeowner A
      Is there a diagram of all of the grease zerks for a Coleman UT 400?  Mine squeaks like crazy and want to try and remedy it.  
    • Rainman
      Coleman UT400 - 6v or 12v battery?
      By Rainman
      I want to put a charger/maintainer for my Coleman UT400 for the winter and need to know if it uses a 6v or 12v battery.
      One search online showed a 6v, but another stated 12v..
      I can look at the battery, but after taking the seat out you cannot see the top of the battery without also removing the top plate under the seat and at 8 degrees outside, I'd rather not be out there too long.
      Can anyone verify what volt (6 or 12) the batter is?
      Thanks in advance ...
    • Homeowner A
      Coleman UT 400 Garage?
      By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • Homeowner A
      UT400 First Oil Change Overfull Milk Chocolate What to Check
      By Homeowner A
      Picked up an essentially new 2022 UT400 with 9 miles on it.  Decided to change the oil because it's probably never been done.  Pulled the dipstick and noticed it was overfull then went and pulled the drain plug and took off the filter and it was like brown water running out.  What should I start checking?
    • eManualonline.com Save 30% OFF Sitewide, Use code: XMAS30
    • Howard Elmore
      Coleman 550 trail riding
      By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...