Quantcast
Jump to content


New 2021 Tracker 800LE Crew Hot Dash area

Sommer Wildes
 Share

Recommended Posts

Sommer Wildes Newbie

Sommer Wildes

Posted
Posted

TLDR (too long didn't read) in blue for quick scanning :)

Hey all! I'm new to the Side-by-side/UTV world. We own a smallish farm and decided to go with the 2021 Tracker 800LE Crew. We like the seating and the ride is smooth. However as a newbie I have some questions that maybe some of you longtime side-by-side/UTV owners can help with. We're still in the "break-in" period and it seems that after 30 min or less of driving the dash area gets super hot. You can feel the heat waves coming off the floorboard by your feet and my phone sitting in the little hole (where a radio might go) felt like I left it in the hot sun for too long. The glovebox was also way too hot. 

 

So the question is, is this normal, or should I start checking engine coolant and filters? We literal have had it a day. I have read forums and looked up info and can't find anyone mentioning this issue. I just don't want to burn the thing up before we've even put it through it's paces ya know!

 

Thanks for any help!

  • Like 1
Traqem Rookie

Traqem

Posted
Posted

There is nothing in that area of a Tracker that should get hot.  Lack of fluids etc should t cause it.  It’s check your wiring and switches and take it in for a look.  

  • Like 1
Sommer Wildes Newbie

Sommer Wildes

Posted
  • Author
Posted
20 hours ago, TapBoss said:

Would definitely check all fluid levels and make sure the fan (if your model has one) is kicking on. 

 

13 hours ago, Traqem said:

There is nothing in that area of a Tracker that should get hot.  Lack of fluids etc should t cause it.  It’s check your wiring and switches and take it in for a look.  

Thanks! I think I will call Tracker and have them take a look at it. We shot it with the thermo gun and it's running about 117-130 degrees on the dash in different areas. 

Gary-Jr Newbie

Gary-Jr

Posted
Posted
On 6/19/2021 at 5:11 PM, Sommer Wildes said:

TLDR (too long didn't read) in blue for quick scanning :)

Hey all! I'm new to the Side-by-side/UTV world. We own a smallish farm and decided to go with the 2021 Tracker 800LE Crew. We like the seating and the ride is smooth. However as a newbie I have some questions that maybe some of you longtime side-by-side/UTV owners can help with. We're still in the "break-in" period and it seems that after 30 min or less of driving the dash area gets super hot. You can feel the heat waves coming off the floorboard by your feet and my phone sitting in the little hole (where a radio might go) felt like I left it in the hot sun for too long. The glovebox was also way too hot. 

 

So the question is, is this normal, or should I start checking engine coolant and filters? We literal have had it a day. I have read forums and looked up info and can't find anyone mentioning this issue. I just don't want to burn the thing up before we've even put it through it's paces ya know!

 

Thanks for any help!

I am new to these and Love Mine, just got it Saturday, And yes my dash was hot also! The Heat comes from the Radiator!, and Fan blowing toward the compartment! THE only shield is the plastic wall! No insulation or deflectors so the heat is blowing on it all! I am going to look for some type of insulation foil based that sticks to Line mine! On Vehicles cars and all have metal and insulation on what would be considered the fire wall. 

 

  • Like 1
Sommer Wildes Newbie

Sommer Wildes

Posted
  • Author
Posted
On 6/28/2021 at 11:38 PM, Gary-Jr said:

I am new to these and Love Mine, just got it Saturday, And yes my dash was hot also! The Heat comes from the Radiator!, and Fan blowing toward the compartment! THE only shield is the plastic wall! No insulation or deflectors so the heat is blowing on it all! I am going to look for some type of insulation foil based that sticks to Line mine! On Vehicles cars and all have metal and insulation on what would be considered the fire wall. 

 

Thank you Gary Jr.!

I was just talking to my father-in-law last night about putting something under the hood to reflect heat. I can't put my phone in any of the compartments when we ride or it heats it too much. Kinda makes all those little cubbies useless if they're gonna heat your stuff up. Although, in winter it will come in handy!

  • Like 1
  • 2 weeks later...
Bryan Apprentice

Bryan

Posted
Posted

Your probably picking up the heat that the Radiator Fan is throwing at the dash. There is a guy in Mississippi that makes a Radiator deflector shield that mounts to the back of the Radiator and deflects the heat down to the ground. I installed one on my machine and it does help a lot with the heat. The shield is also hinged so that in the winter time you can lift up on the door and now you have the heat coming back to the firewall to help with warmth in the cab. The only thing I can’t tell you yet is how much dust is the shield going to kick up while on the trail. I’m scheduled for another trip to the Hatfield And McCoy trails in October and will find out then. 

  • Like 1
  • Thanks 1
Gary-Jr Newbie

Gary-Jr

Posted
Posted
6 hours ago, Bryan said:

Your probably picking up the heat that the Radiator Fan is throwing at the dash. There is a guy in Mississippi that makes a Radiator deflector shield that mounts to the back of the Radiator and deflects the heat down to the ground. I installed one on my machine and it does help a lot with the heat. The shield is also hinged so that in the winter time you can lift up on the door and now you have the heat coming back to the firewall to help with warmth in the cab. The only thing I can’t tell you yet is how much dust is the shield going to kick up while on the trail. I’m scheduled for another trip to the Hatfield And McCoy trails in October and will find out then. 

yes I found him! And Have one on order! I also have the heat shield insulation on order for the rear wall! also

 

Bryan Apprentice

Bryan

Posted
Posted

I just ordered the Muffler Heat shield also. Once this weather breaks I have a three inch lift and also a heater to install in mine. 

Blkpwdrhunter Newbie

Blkpwdrhunter

Posted
Posted

Same issue here I just bought one new and with very little load and riding it heats up to 208 degrees and the fan will kick on. We feel all the heat coming up from the floorboard and the dash gets warm too. Do these things run that hot with just light duty of riding 20-25mph?? It like the thermoset is not working to allow coolant to cool the engine. What's the website to order the heat shields? 

  • Like 1
Gary-Jr Newbie

Gary-Jr

Posted
Posted

That is just normal operation and the same with cars and trucks! But the issue is with these the firewalls are not insulated!!! so we feel it

 

  • Like 2
Bryan Apprentice

Bryan

Posted
Posted

To get the heat shield call Grenada Bad Boys and ask for Mike JR in service. Number is 662-307-2729. A couple positive things about it is they are a Tracker Dealer and they actually use their machines. See item is that the heat shield is hinged to allow you to open it up in the winter when you want that heat hitting your firewall. 

  • Like 2
Blkpwdrhunter Newbie

Blkpwdrhunter

Posted
Posted

I called Tracker and they told me thats normal operating temp as well. I have ordered some heat shield material as well to insulate several areas. You're right in cold weather or hunting season that heat will feel welcomed.  I'll give GBB a call later thanks for the intel. 

  • 4 months later...
Don P. Newbie

Don P.

Posted
Posted
On 7/18/2021 at 5:00 AM, Bryan said:

Your probably picking up the heat that the Radiator Fan is throwing at the dash. There is a guy in Mississippi that makes a Radiator deflector shield that mounts to the back of the Radiator and deflects the heat down to the ground. I installed one on my machine and it does help a lot with the heat. The shield is also hinged so that in the winter time you can lift up on the door and now you have the heat coming back to the firewall to help with warmth in the cab. The only thing I can’t tell you yet is how much dust is the shield going to kick up while on the trail. I’m scheduled for another trip to the Hatfield And McCoy trails in October and will find out then. 

 

  • Like 1
  • 2 months later...
Dealin Rookie

Dealin

Posted
Posted

I have a 800 LE and don't have the hot dash issue, but found if I remove the doors in the summer, it really cools the cab down. I also installed a 12V dual fan mounted under the dash-one aimed at the driver and one aimed at the passenger to help in the hot summer days. (Bought it off Amazon.)Removing the doors makes for easy entry also. I do reinstall them in the fall.

Obed Rookie

Obed

Posted
Posted

This is normal. The way the fan sits it pushes the heat towards the cab. Somebody in the Tracker Group on Facebook makes a heat shield that people say fixes the problem. I haven't noticed the heat but will be paying attention to it on my next ride. PS I have nothing to do with the heat shield nor do I get any sort of kick back. If you decide to buy one please post an honest review on this site. 

  • 8 months later...
BackwoodsBoz993 Newbie

BackwoodsBoz993

Posted
Posted
On 7/18/2021 at 5:00 AM, Bryan said:

Your probably picking up the heat that the Radiator Fan is throwing at the dash. There is a guy in Mississippi that makes a Radiator deflector shield that mounts to the back of the Radiator and deflects the heat down to the ground. I installed one on my machine and it does help a lot with the heat. The shield is also hinged so that in the winter time you can lift up on the door and now you have the heat coming back to the firewall to help with warmth in the cab. The only thing I can’t tell you yet is how much dust is the shield going to kick up while on the trail. I’m scheduled for another trip to the Hatfield And McCoy trails in October and will find out then. 

I added one of the deflectors it works like a champ and is easy to install .  The hinge allows the heat to hit the fire less wall in cold weather.  

BackwoodsBoz993 Newbie

BackwoodsBoz993

Posted
Posted

I purchased one of the deflectors mentioned in this post.  I was impressed with Mikes knowledge of the tracker and the reason for the high heat hitting the dash.  His mod works as advertised.  Deflects heat to the ground and has a hinge that allows it to flow back to the dash in cold weather  Easy install.  He also helped with gear shift issues.  Mine would get stuck straight from Bass Pro.  Mike said if it won’t shift, turn off the key.  If it shifts off, the clutch needs to be adjusted.  I wish his shop was in PA because my Bass Pro shop has no clue why it locks up!

  • 9 months later...
Pilot1996 Apprentice

Pilot1996

Posted
Posted

I too added a heat deflector from Grenada Boys in Mississippi. Noticeably cooler in the cab. I’m wondering if it will cause the Tracker to run hotter…….not had it warm enough yet for the cooling fan to kick on…..

  • 3 weeks later...
Pilot1996 Apprentice

Pilot1996

Posted
Posted
On 8/18/2023 at 6:02 PM, Pilot1996 said:

I too added a heat deflector from Grenada Boys in Mississippi. Noticeably cooler in the cab. I’m wondering if it will cause the Tracker to run hotter…….not had it warm enough yet for the cooling fan to kick on…..

Update: does not seem to run any hotter. Heat shield/reflector was money well spent!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
 Share
Go to topic listing

  • Similar Topics

    • Poppateets
      New owner with questions
      By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
    • Greg Kilgore
      Heater installed 2021 Axis 500
      By Greg Kilgore
      Last year bought a small universal coolant style cab heater. Well I installed it today. Thanks to another member, RangeRider45, and his install
       
      That told in his post the size fitting he used. I got the same fittings plus a few others. And all went kinda smooth. Took a few minutes to get air purged from coolant system. Should have parked on hill with front up in the air. But would have had a hard time working on it.
      I had a variable power switch connected to an overhead cab fan. Never really used the fan that much. And I have to remove the fan to put on my cab enclosure anyway. So I repurposed the switch to supply power for the heater. The heater has 2 12-volt DC computer fans that are rated for 1.8 amps each. So it's not going to be a big drain on the weak charging system. And with the switch I've got great control over the speed of the fans.
      If anyone is interested the radiator hoses are 7/8 inch. I reworked the temperature sending unit (moved it closer to radiator) to make room for all the extra plumbing I did to get the heater to work the way I wanted. 
      Plumbing parts list.
      10-15 worm water clamps. 3/4 to 1 1/4 inch size.
      2 1" x 3/4" x 1" PEX Tee
      1 3/4" PEX ball valve
      1 1" PEX ball valve
      5/8" heater hose. I got 6' and probably have 4' left over.
      I used the radiator house I cut out to use as splices between the PEX fittings. The PEX fittings are not true to their dimensions that are stated on the package. So they fit the 5/8" and 7/8" very nicely.
      They way I have it plumbed is from radiation out side. A tee, then the 1" ball valve, then a Tee. Coming off the Tees are the hoses going to the heater core. There is a 3/4" ball valve on one of the Tees. The ball valves are used to bypass the heater core in the summer. Or direct the hot coolant through the heater core in winter. The temperature sending unit tells me how hot the coolant is. And if anything is getting too hot. The dash also has an idiot light that comes on if the head gets too hot. But doesn't do anything if the radiator gets too hot. There is a temp sensor on the radiator that controls the electrical fan. But if the coolant isn't circulating. That switch never sends a signal to turn on the fan. But enough talking/rambling. Everyone wants to see pics. The only thing I need to change is the orientation of the handle on the 1" ball valve. I have 2" or more clearance between the handle and the tire when cut hard right. But I still don't like it. And instead of taking the valve out and rotating 180°. I'm just going to take the nut off and rotate the handle 180°. Think I need to make a locking mechanism to lock the handles in place so they don't vibrate closed when the machine is moving.
      The temperature sending unit and housing. Size 22 mm. Aluminum from Amazon.

      Upper Tee the lower Tee is identical. Can also see the handle of the 3/4" ball valve on the 5/8" hose going to the heater.

      The 1" ball valve. Goes between the 2 Tees

      Wide view of the plumbing.

      The heater installed in the sxs. The 3 black hoses are just hanging there. Zip ties to the heater but not attached to any thing. Will probably just direct 2 toward the wife's feet. And 1 toward mine. Or what ever is need as the heat is needed on rides. The black hose in passenger floorboard is some 1" hose that is not needed. Don't know what I'll do with it.

       
      I think if I was going to do it again. I'd put some Indian Head gasket dressing or silicone on the 1" side of the PEX fittings. And I may still do that. But I really hate the ideal of introducing air back in the coolant system.
       
      Any questions just ask. It may take a while to answer. But I'll try.
      Ya be good and stay warm over the next few months 
       
      Kilgore.
    • Eagle Mountain Outfitters
      NEW Rear Foldable Cargo Basket designed specifically for the Mule
      By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • Hunterman22
      2021 Hisun Axis 500 No Start - Need Help Please
      By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • mac66
      2021 Axis 500 4 month Review
      By mac66
      I bought a used 2021 Axis 500 last April.  Low mileage and got it for considerably less than what they go for new.
      The first thing I did was change the oil/fluids and also put a new drive belt on it.  The only other thing I did to it was add a rear vinyl window that zips open and rolls up to keep the weather off.
      I used it on my 52 acre property to check trail cameras, service the food plots, haul fertilizer, seed etc etc. It's has a good size bed and is not too big or small.  It has worked well as a utility vehicle. 
      Other than using on the trails working around the property I haven't used it much off road...at least until last weekend when I went on 74 mile group ride around the county. In my state it's legal to ride on any road that's not a state or federal highway. The group started in town, rode about 30 miles on back roads to the state ORV trail system. Then did about 20 miles on the trails and then headed back via back roads to town.   
      It had rained for 2 days straight prior, so the trails were one mud hole after another.  It was very challenging.
      The good...
      -It worked fine, never had any kind of issue with it since I bought it.
      -It kept up with more expensive machines on the trails. I was the only one with a CCC (Cheap Chinese Crap) machine.
      -Fairly comfortable to drive.
      -The roof, windshield and rear window kept most of the rain off when it started raining in the afternoon.
      -Okay, I cheated. I peeled off the AXIS 500 stickers on each side. Everybody in the group assumed I had a Rhino. They didn't ask, I didn't tell.
      The not so good...
      -The horsepower rating on the 500-cc engine is 24 hp but it seemed underpowered. While I could go about 35 mph with the pedal to the metal on pavement and hard packed dirt roads the best I could do on loose packed roads was 27 mph. I had trouble keeping up with the others in the group.  It also bogs down on inclines in high gear.  On the other hand, in low gear and 4wd I didn't have any problems going through mud or sand or up hills.
      -It is LOUD! Had to wear shooting earmuffs to keep my ears from ringing while riding. Going to have to address that.
      Overall Impression...
      I was impressed with it on the trails, and it is a good utility vehicle for working around the property. Considering what I paid for it I am very happy with its performance.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...