Quantcast
Jump to content


Recommended Posts

Posted

So I have a new(ish) 2020 Coleman outfitter 550. It came from TSC with 10hrs and needed some work. After changing the choke solenoid, spark plug, fuel injector and battery, it ran great!  However after a hard rain storm, I went out to start it and the dash lit up as normal but there was nothing from the engine. I heard what I think was the starter click but nothing after that. I ordered a new starter just in case, but does anyone have any other idea of what it could be?  I assume something that should not have gotten wet, got wet but I have no clue as to what. I also checked the fuses, and nothing blew. 

  • Dabadoo changed the title to 2020 outfitter 550, Power to dash, but not starting
Posted
On 7/4/2021 at 5:24 PM, Dabadoo said:

So I have a new(ish) 2020 Coleman outfitter 550. It came from TSC with 10hrs and needed some work. After changing the choke solenoid, spark plug, fuel injector and battery, it ran great!  However after a hard rain storm, I went out to start it and the dash lit up as normal but there was nothing from the engine. I heard what I think was the starter click but nothing after that. I ordered a new starter just in case, but does anyone have any other idea of what it could be?  I assume something that should not have gotten wet, got wet but I have no clue as to what. I also checked the fuses, and nothing blew. 

Check the brake switch to make sure it is make contact 

  • 3 weeks later...
  • 4 months later...
Posted

Hey everyone, wanted to give you an update on what I found out. So after letting my local guy have a crack at it for 4 months, he had no idea and was just pulling random things and replacing them. I finally brought it to a hisun dealer, and he found that there were wires missing and/or connected wrong along with a bad starter solenoid. 10 days later and it was back up and running.  So at least my story had a happy ending!  Thanks for all the suggestions and tips everyone put out. 

Posted
11 hours ago, BadRadDadNV said:

I thought 2020s were fuel injected. How does a choke solenoid work?

That’s a good question for the mechanic, I have no idea. 

  • 1 year later...
Posted
On 3/18/2023 at 9:50 PM, bboyett88 said:

Can you find out what wires. No fire to our 2019 starter. The solenoid clicks. And dash is lit

I’m not really sure what you’re asking here. However I no longer have this UTV. sold it to someone else so they could figure it out on their own dime. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
    • By dman66
      My buddy has a ut400 that the forward gear keeps popping out of gear. She only has like 400 miles on the odometer .the shift cable has been adjusted and the shift lever has been updated / modified. All other gears are good. Is there an internal detent cam or something that wears out or shift fork that can be replaced ? Or is there some other magic that I can perform ? Looks like the engine needs to be split.
×
×
  • Create New...