Quantcast
Jump to content
This Topic


2021 Massimo Buck 250 won’t start

BuckMaster

By BuckMaster
in Massimo UTV SxS Forum

 Share

Recommended Posts

BuckMaster Newbie

BuckMaster

Posted
Posted

We have a 21 Buck 250 that will not start. Replaced the battery with new fully charged battery. The lights dim and there is a click like the starter is trying to engage. Every once in a while the engine will turn one revolution slowly and then we are back to the same situation of nothing. 
Was wondering if anyone else has had this issue or know what could be causing it. 
Thank you 

  • BuckMaster changed the title to Buck 250 won’t start
  • Alex changed the title to 2021 Massimo Buck 250 won’t start
T-boss 410 Experienced

T-boss 410

Posted
Posted

Hmmm, maybe the starter solenoid needs replacing? That or the starter itself is bad, but I would start with a new starter solenoid. Mine would lag frequently, and I replaced the solenoid. No issues now.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Sando
      Massimo Buck 450 will not start
      By Sando
      2023 Massimo Buck ran for minute then died. Key on all power to dashboard but do not hear full pump turn on like previously. Also no fire at plug. ECU?
    • Dennis
      bd 300 bulldog shifting issues
      By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • Grant
      Can’t figure out what part I’m missing
      By Grant
      I recently bought an axis 500 and it’s missing a box or something the plug is L shaped I’ve looked through the wiring diagrams and still can’t figure it out. The plug is located right near the battery housing 

    • rdborra
      Bobcat 2200 dump bed relay pops fuse and stalls after warm
      By rdborra
      I had to remove the relay for the dump bed due to it popping the fuse for main key power. I have tried to find a short but nothing seems to out of normal. I also disconnected the dump motor and switch and still pops the fuse. Also, when the machine is warmed up i get about 5 to 10 of work out of before it stalls. Once I can get it to start again I have to use the choke to keep it running. 
    • strike250
      Free Massimo Buck 400 service manual
      By strike250
      I have the factory service manual available for the Buck 400. Just send me a message with your email and I'll get it to you. Although there is no charge for this, it would be great if  you would visit my website where you could donate any amount to help do things like this with others who need it. Again, there is no charge for this manual, and no obligation to donate. But if you did, I would thank you for sure. Have fun on the trails. www.warriorsoffroad.com
       
      Matt

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...