Quantcast
Jump to content


Recommended Posts

Posted

After six months of tireless (for the wife incredibly annoying) research, we decided to go with a 2021 Kawasaki Mule SX XC. The 3 year warranty coupled with the Mule's widely held reliability ratings were the determining factors. I bought a used Mazda SUV a couple years ago and it ended up being an $8,000 nightmare. It needed a new engine and engine harness, which all said and done added almost another 7 grand.  The wife is still pissed about it and she was determined to avoid a repeat with the UTV. We've had it a week now and I think our fears of getting a lemon have been put to rest. It's been pretty awesome not having to walk  over 100 yards each way to take the trash down to the curb and to get the mail.  We absolutely love it and once I finish widening our trails it'll be that much better. The only gripe I have other than it lacking a little in the power department and not including a single accessory like a roof, windshield, winch, or even a trailer hitch (it's  called a Mule for Christ's sake! How do you not include a hitch?) is that the brakes seem a little weak. Does anyone know about this issue with the Mule? I googled it but can't find anything. And unfortunately the guy that delivered it forgot the manual  so I'm still waiting for the dealer to mail it to me. Anyway, does anyone know if I need to make some sort of adjustment or add brake fluid to get better braking power? Any info would be greatly appreciated.  

Posted

congrats on your purchase...

the low on power could be that the drive belt still needs to be broken in and the seller should describe the way you should drive to properly break in the belt.\

I'd express your concerns on the brakes to the seller as well. my grandad purchased a Mule SX last year and the brakes felt good. you could stop on a dime.

Posted

here is the roof windshield i put on his SX.

the windshield is nice, very clear lexan the dual vents and flip up capability is nice for extra air flow in the cab.

https://www.sidebysidestuff.com/falcon-ridge-aero-vent-front-windshield-kawasaki-mule-sx.html

 

https://www.sidebysidestuff.com/moose-polyethylene-hard-top-kawasaki-mule-sx.html

the roof is just a basic HDPE plastic with a little fancy design around the top, and on the back has a slight angle to shed water.

Posted

there is.. it's under the dash, put right below the gear shift there is a transparent tank and you should be able to tell the level from there.  I believe i have it circled in red.SX.thumb.png.6bdeb7b1662cfbcf7ecf84a8a811314f.png

 

Posted

Congratulations on your new buggy!

I think that if you were looking for something to work out of, and drive around the acreage doing chores. The mule is an excellent choice. With responsible driving, and good maintenance, you'll get many good years out of it. 

If it's 4wd, don't drive around in 4wd. That's ONLY for when there's soft ground. Those expensive tiny little parts in the front drive just won't take the abuse, over time. 

There's plenty of accessories out there, depending on where you look, and what you want for it. Some accessories turn out to be extremely helpful, while others that I thought would really make a difference, turned out to be a disappointment. The best add ons are those you make yourself.

20200119_151111_HDR.thumb.jpg.01060b5d17e44e5a85410246d8bcad0c.jpg Here's a picture of mine. Those side boards are without a doubt, the best accessory I've added. 

 

  • Like 1
Posted

All the available accessories are definitely one of the things that sold us on the mule. We're gonna go with a soft roof and hard windshield set up for the winter months. My wife really enjoys driving around the acreage in the open air and the soft roof will give us the option of taking it off at a moment's notice. Also hoping to  add a winch and hitch receiver real soon. It's gonna be fun building it up. Where do you get those sideboards and what do they cost? Do they fit the SX? I've been looking for something similar but couldn't find anything. The box  is way too shallow right now for my linking. 

Posted

I found those side rails at a local Powersports /Kawasaki dealership. They were a factory offered item, so were a bit expensive at around a hundred fifty bucks. But they're heavy duty steel.

These days, I'd probably just make some out of hardware store square steel tubing, and a few oak planks. But I have seen other manufacturers that make them. Try Essex manufacturing Ft. Worth Texas. They make lots of stuff for outfitting a mule. They make mule accessories for the military, as well as fire departments. If you're ever near Ft. Worth, Texas it's worth the time to stop by. There's lots of stuff that they make for the kits, that aren't advertised. But they'll still sell most of it. Mine has helicopter lift rings front and back. The military uses them to drop a mule by helicopter into remote areas, I use them for tie downs, and pulling out of the mud. Need a tri-pod heavy machine gun gimbal for the bed? They make those too. Even though a mule is a poor platform for heavy firepower. But seriously, they also have bed extensions, where they chop another bed in half, and add that to yours to make it longer. I also picked up a few other things, like a poly skid plate, to cover the open to the ground area under the seat. Enclosing it made it more useful for storage, and protects the second radiator that's under the seat. 

  • Like 1
Posted

welcome to the mule family...........love ours....................since we bought it, i added a soft top with doors, windshield, winch, and a snow plow...............also, i rigged up a 2200 watt generator in the bed to provide power for an electric heater and small fan for plowing in the winter.......as for the brake issue, we have had none........as for the power issue, you have to remember, if same engine as ours, it is only a 400 cc single cylinder, putting out only about 14 horsepower..........my zero turn has almost twice that much..............and never sell the locking differential, low range, and 4 wheel drive short................i have been in some pretty deep snow, and it has performed great everytime..............i do wish it had a windshield wiper and a rear view mirror..............best of luck to you..................ps. we have had it since 2015..........so far, no issues..........................

 

poppy and mule.jpg

mule ready for snow.jpg

generator.JPG

  • Like 1
Posted

Your Mule looks awesome! I'm really falling in love with ours. We're not looking do any extreme offf-roading (I have a 4-wheeler for that), just some light trail riding on our half mile of trails, work around the property, some plowing, taking the trash down and getting the mail. Oh, and riding with the dogs! It's got plenty of power for all that stuff. So, do you use a soft top, hard windshield combo in the winter? Looks like a perfect fit. That's what I worry about as some soft tops and doors for the mule look frumpy and stretched out.

Posted

Mine has the factory top, no windshield, or doors. Since it's in Texas there's rarely a need for a windshield.

It does have a sliding back glass, but it stays shut, and was only installed to block the noise of the diesel air intake vent. Which is quite loud. 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Rider
      I have a 2021 Massimo T-Boss 410 and it needs the cv boots replaced.  Has anyone had to replace the boots on their T-Boss?  Does anyone know where to get replacement boots?  Are there boots for other ATV/UTVs that will fit?  The Massimo parts site only sells the entire axles.  Thanks
    • By Greg Kilgore
      Last year bought a small universal coolant style cab heater. Well I installed it today. Thanks to another member, RangeRider45, and his install
       
      That told in his post the size fitting he used. I got the same fittings plus a few others. And all went kinda smooth. Took a few minutes to get air purged from coolant system. Should have parked on hill with front up in the air. But would have had a hard time working on it.
      I had a variable power switch connected to an overhead cab fan. Never really used the fan that much. And I have to remove the fan to put on my cab enclosure anyway. So I repurposed the switch to supply power for the heater. The heater has 2 12-volt DC computer fans that are rated for 1.8 amps each. So it's not going to be a big drain on the weak charging system. And with the switch I've got great control over the speed of the fans.
      If anyone is interested the radiator hoses are 7/8 inch. I reworked the temperature sending unit (moved it closer to radiator) to make room for all the extra plumbing I did to get the heater to work the way I wanted. 
      Plumbing parts list.
      10-15 worm water clamps. 3/4 to 1 1/4 inch size.
      2 1" x 3/4" x 1" PEX Tee
      1 3/4" PEX ball valve
      1 1" PEX ball valve
      5/8" heater hose. I got 6' and probably have 4' left over.
      I used the radiator house I cut out to use as splices between the PEX fittings. The PEX fittings are not true to their dimensions that are stated on the package. So they fit the 5/8" and 7/8" very nicely.
      They way I have it plumbed is from radiation out side. A tee, then the 1" ball valve, then a Tee. Coming off the Tees are the hoses going to the heater core. There is a 3/4" ball valve on one of the Tees. The ball valves are used to bypass the heater core in the summer. Or direct the hot coolant through the heater core in winter. The temperature sending unit tells me how hot the coolant is. And if anything is getting too hot. The dash also has an idiot light that comes on if the head gets too hot. But doesn't do anything if the radiator gets too hot. There is a temp sensor on the radiator that controls the electrical fan. But if the coolant isn't circulating. That switch never sends a signal to turn on the fan. But enough talking/rambling. Everyone wants to see pics. The only thing I need to change is the orientation of the handle on the 1" ball valve. I have 2" or more clearance between the handle and the tire when cut hard right. But I still don't like it. And instead of taking the valve out and rotating 180°. I'm just going to take the nut off and rotate the handle 180°. Think I need to make a locking mechanism to lock the handles in place so they don't vibrate closed when the machine is moving.
      The temperature sending unit and housing. Size 22 mm. Aluminum from Amazon.

      Upper Tee the lower Tee is identical. Can also see the handle of the 3/4" ball valve on the 5/8" hose going to the heater.

      The 1" ball valve. Goes between the 2 Tees

      Wide view of the plumbing.

      The heater installed in the sxs. The 3 black hoses are just hanging there. Zip ties to the heater but not attached to any thing. Will probably just direct 2 toward the wife's feet. And 1 toward mine. Or what ever is need as the heat is needed on rides. The black hose in passenger floorboard is some 1" hose that is not needed. Don't know what I'll do with it.

       
      I think if I was going to do it again. I'd put some Indian Head gasket dressing or silicone on the 1" side of the PEX fittings. And I may still do that. But I really hate the ideal of introducing air back in the coolant system.
       
      Any questions just ask. It may take a while to answer. But I'll try.
      Ya be good and stay warm over the next few months 
       
      Kilgore.
    • By Eagle Mountain Outfitters
      Our R&D team just finished the first unit and wanted to show you guys. Need more cargo space without losing the functionality of being able to fold down the seat to use the full bed? Eagle Mountain Outfitters, the maker of the original metal UTV roof, has designed a foldable rear cargo basket to meet your needs. Price is $625 + $30 shipping.  If you have any question's, please reach out to me at [email protected]
       

    • By Hunterman22
      2021 Hisun Axis 500 UTV (From Lowes)
      Will NOT START
      MY apologies if this is to much info just wanted to give yal the most information possible for help.
      I'm a so called diyer. An Electrician by trade 21yrs. I got my S×S from my last job. The contractor purchased this S×S for this specific job brand new, from Lowes. They used it for hauling materials, tools, & a little bit of anything you can think of on an Industrial type job site. 
      I remember getting on the SxS one time & pushed the gas petal all the way to the floor & SxS had very little power. 
      So anyway ,when the job finished up back mid July this year (7/2024) , I asked the contractor what they was going to do with it. I was told to take it. Otherwise it would go to the contractors yard (storage yard) & most likely rust away. 
      Took it home washed it , it had a heavy coat of dust on it & in it dust was every where. My helper & I had to push it on the trailer to get it home.  After washing it throughly I let it sit & dry out for a good day and half, maybe 2 days. Before trying to start it. NO START. Will turn over & try to start but thats it. 
      So here's what I've purchased & installed. New Air Filter, new spark plug, new air idle control valve (AICV), new throttle position sensor, new throttle body, new oxygen sensor, new digital dash speedometer/fuel gauge/clock. 
      Also drained the old oil & gas & replaced with new oil & 93oct. gas. I should probably mention that I've changed the AICV twice. The 1st time I changed the AICV I was able to get the SxS started & let idle for at least 10-15min. Drove out of the garage, with very little power,  turned it around & barely got it back in the garage.That was the one & only time I've been able to start the SxS. I've also cleaned the Throttle Body and & intake with TB cleaner.  So after that the AICV was  making weird noise so I pulled it out & tried cleaning it, pretty sure I messed it up. So I purchased a Throttle Body that came with new AICV & TPS. Still NO START.  I've checked the fuel pump & the fuel injector.  I took the injector off still hooked up to wiring & turned the key over, the injector sprayed a lot of gas out kinda the size of a volleyball. I've also checked the clearance gap on the intake & exhaust valve. But today 11/2/2024 I'm going recheck spark plug gap & the valve gaps. And alot of other checking. Would the driver side seat belt have anything to do with it not starting?? I know the driver side seat belt has to be in gauged for full throttle "going fast". Thing is the drv. side seat belt will latch but feels like might be messed up inside of it. Tired opening it up but to no avail.  I've never had a S×S or 4wheeler so I was really excited when I got the S×S,not so much anymore.  I work on & fix my own vehicles usually no problems.  But this SxS is kicking my ass.
      So if possible & someone could help me with some ideas or tell me what Im doing wrong or did wrong, I would greatly appreciate it.  Thank you for reading thus far.
       
       
    • By mac66
      I bought a used 2021 Axis 500 last April.  Low mileage and got it for considerably less than what they go for new.
      The first thing I did was change the oil/fluids and also put a new drive belt on it.  The only other thing I did to it was add a rear vinyl window that zips open and rolls up to keep the weather off.
      I used it on my 52 acre property to check trail cameras, service the food plots, haul fertilizer, seed etc etc. It's has a good size bed and is not too big or small.  It has worked well as a utility vehicle. 
      Other than using on the trails working around the property I haven't used it much off road...at least until last weekend when I went on 74 mile group ride around the county. In my state it's legal to ride on any road that's not a state or federal highway. The group started in town, rode about 30 miles on back roads to the state ORV trail system. Then did about 20 miles on the trails and then headed back via back roads to town.   
      It had rained for 2 days straight prior, so the trails were one mud hole after another.  It was very challenging.
      The good...
      -It worked fine, never had any kind of issue with it since I bought it.
      -It kept up with more expensive machines on the trails. I was the only one with a CCC (Cheap Chinese Crap) machine.
      -Fairly comfortable to drive.
      -The roof, windshield and rear window kept most of the rain off when it started raining in the afternoon.
      -Okay, I cheated. I peeled off the AXIS 500 stickers on each side. Everybody in the group assumed I had a Rhino. They didn't ask, I didn't tell.
      The not so good...
      -The horsepower rating on the 500-cc engine is 24 hp but it seemed underpowered. While I could go about 35 mph with the pedal to the metal on pavement and hard packed dirt roads the best I could do on loose packed roads was 27 mph. I had trouble keeping up with the others in the group.  It also bogs down on inclines in high gear.  On the other hand, in low gear and 4wd I didn't have any problems going through mud or sand or up hills.
      -It is LOUD! Had to wear shooting earmuffs to keep my ears from ringing while riding. Going to have to address that.
      Overall Impression...
      I was impressed with it on the trails, and it is a good utility vehicle for working around the property. Considering what I paid for it I am very happy with its performance.
×
×
  • Create New...