Quantcast
Jump to content


snow blade and mudd flares

Russ

By Russ
in Joyner UTV SxS Forum

 Share

Recommended Posts

Russ Explorer

Russ

Posted
Posted

I was wondering if anyone of you have got a snow plow or blade for the trooper or renegade. We are going to order a couple with the next order of machines, but that may be another month or so and I cant find any pics from anywhere to show an up close pic of how they mnt to the trooper. Also if anyone does have one from swisher, I was wondering how it holds up. Also was wondering what different ideas anyone has done for fender flares to keep some of mud off, was thinking maybe some of the rubber flare that you can buy in a roll that I have seen on jeeps. Someone comes to test drive and they come back covered in mud.

Guest Lenny

Guest Lenny

Posted
Posted

I havn't done anything with flairs but I do plan on designing fibreglass fenders for the Trooper later on to solve not only the mud throwing problen but the lond travel clearance problem. When I do this, I will develope an initial version in a 3d modeling program and post it for comments. I'm a pretty good designed and just ok at how it looks. I designed industrial machinery and looks ment nothing. So what I would like to do it to get everybody's input so when done we'll have a great set of retrofit fenders to go to.

Lenny

Russ Explorer

Russ

Posted
  • Author
Posted

As for the fenders, the reason I was asking about the rubber flares was because they would be flexible and I would lower the chance on breaking the fenders. We have alot of atv trail, poker runs etc. around here and they are tight for the trooper. If you do come up with a new design I would like to see it.

Thanks for the link to the pic of snow blade, I don't know what kind of blade that is. We are going two order a couple of Swishers, they make the brackets for the Trooper and Renegade. From what I know you have to take the winch off and put in on another plate with the blade and then the whole ass. goes into the reciever on the front of the Renegade but the new troopers dont have the reciever in the front anymore so was just wandering how it bolted on. I know everything hinges and hooks up in the front.

Mopartist Collaborator

Mopartist

Posted
Posted

I thought I'd chime in here and say that I got some truck fender flare material from JC Whitney for about 35 bucks if I remember right. They have different contours for mounting; and I chose the flat surface one. (I think you can see it in the pic attached) I had to trim the fender lip off in order to get a nice "blendable yet square" fit. I used 1" screws with locking nuts every 4 inches or so. Then rounded the front of the flare with a box knife to blend into the fender. I think the material was the "standard duty" model.

http://www.jcwhitney.com/EASY-TO-TRIM-RUBB...13135_10101.jcw

post-209-1234823666_thumb.jpg

4x4x454 Community Regular

4x4x454

Posted
Posted
I thought I'd chime in here and say that I got some truck fender flare material from JC Whitney for about 35 bucks if I remember right. They have different contours for mounting; and I chose the flat surface one. (I think you can see it in the pic attached) I had to trim the fender lip off in order to get a nice "blendable yet square" fit. I used 1" screws with locking nuts every 4 inches or so. Then rounded the front of the flare with a box knife to blend into the fender. I think the material was the "standard duty" model.

http://www.jcwhitney.com/EASY-TO-TRIM-RUBB...13135_10101.jcw

Do they keep the mud off I could only find 4 1/2" flares and if I remember right the tires stick out almost six?

4x4x454 Community Regular

4x4x454

Posted
Posted
Oh absolutely! I was getting sand blasted before; now nothing comes off the front tires into the seats. Now if I can only solve the dust draft problem

If you have a windshield what I did was cut a few inches off the top and bottom it did not stop it but it helped a lot. Another thing i have herd of is to put a back on the cab. rocmoc said it will also help to remove the bottom of the dash. Cutting the windshield and removing the bottom of the dash will allow the air to flow through the cab and not create the vacuum caused by the windshield. And did you do anything about the rear wheels?

rocmoc Grand Master

rocmoc

Posted
Posted

Tire tread pattern makes a big difference also. With the new tires, I am not getting nearly as much coming back at us MOST of the time. Unfortunately, the new tires/rims are even wider and have a greater potential. I will have to make something from fiberglass as the rear fenders had to be cut for the upward movement of the rear tires. This will require a entirely new fender design.

rocmoc n AZ/Mexico

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Alien10
      Snow Blade for Coleman Outfitter 550?
      By Alien10
      I'm thinking of buying a snow blade for my Coleman Outfitter 550 (Hisun with Coleman stickers).
      Has anyone purchased a snow blade that can offer the make and model they bought and any comments, pros  cons etc.?
      Not 100% sure I'm going to buy, as the selection of blades for this model seems a bit thin on line. 
      Thoughts and comments welcomed.
      Thanks in advance.
    • didgeridoo
      Hisun Sector e1 Battery replacement: any tips?
      By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • lincolnsq175
      Are there any performance parts for ut400?
      By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
    • SpaceGhost
      Everybody say hi to another newbie...
      By SpaceGhost
      As with any forum you join, there is a requirement for an obligatory introduction... and that seems fair. How else do you get that first post in there without jumping in with some stupid question right out of nowhere?

      Hi. I'm Space Ghost. Well, not really, but that was my call sign on my last deployment before an IED made me non-deployable, and I an now retired/disabled, and living on my wonderful VA disability. I did almost 28 years in total between the Army, Army Reserve, and National Guard. 1 deployment with the Reserve (Desert Storm) and 3 with the Guard (1 pre, and 2 post 9/11)

      Married (going on 30 years) one of each. (both out of the nest)

      My vehicle is (at least not yet) not a UTV, however, it is an ATV, A 2001 Kawasaki Prairie 400.
       

       
      BTW, That's Brandy, my former PTS/TBI service dog on the bike. RIP old girl. She's internet famous. Perhaps you've seen her before...
       

       
      The reason I'm here is that Arthritis is starting to set into my wounds and my mobility is getting worse. I will be selling the quad bike soon, and going with a SXS, and have selected a Can Am model as the replacement, so I figured I had better get on board a forum somewhere. Just put in for my Guard retirement, and will be very soon looking to get into a Commander 6x6.

      Wouldn't mind having the Limited with the Hvac system, but am really not sure it's worth the extra 10 grand or not. Plus it's 500 pounds heavier, and I prefer the doors off in nice weather. It's so much easier when working in the yard, and so much more fun when on the trail.

      Anyway, I'm here now, so it will help me research more and make up my mind. Plus once I have it, I'll be able to share stories about it and of course, continue to learn more, as it will be my 1st sxs. Still have time before I get my retirement. Takes a good 90 days at least according to the guy I talked to... Typical government efficiency... lol.
       

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...