Quantcast
Jump to content


2008 Joyner Trooper T2 Spare Tire/Wheel

Mrusson

By Mrusson
in Joyner UTV SxS Forum

 Share

Recommended Posts

Mrusson Newbie

Mrusson

Posted
Posted

Hey gang,

    I am looking for a 14x6 wheel with a 4/115 bolt pattern with the 4+2 offset for my 2008 Trooper. I have always had a spare tire with my UTV's and I am struggling to find a steel wheel for use as a spare tire with this Trooper. Has anyone had any luck finding a plain steel wheel for use as a spare? My trooper uses the 14" allow wheels from the factory with 14x6 fronts and a 14x8 rears. I assume the 14x6 can be used front or rear as a spare. Thanks for any info you may have come across.

mixfixdave Enthusiast

mixfixdave

Posted
Posted

Honda Civic and others use 4x114.3 and I have a 15” civic set that I use with my BFG AT street tires that fit fine.
Also have some 30x10x15 UTV tires on weld racing drag lites with the dual 4 lug pattern…guy I bought them from had them on a mustang, but the 4x114.3 holes fit my 2008 T4. I had to buy the shouldered lug nuts to fit those wheels, but the stock Honda wheels use the same lug nut seats as the factory trooper.

  • Like 1
Mrusson Newbie

Mrusson

Posted
  • Author
Posted

Dave,

   That is a wealth of information! Thank you so much for the info. I love your BFG streeties setup. Very nice! I will locate me some civic wheels and see what I get put together. I'm sure I will be back with more stuff. Also, thanks for the images of your power steering. That is a great setup and it looks super simple.

  • 3 weeks later...
  • 4 months later...
Dave Ramm Rookie

Dave Ramm

Posted
Posted
On 9/19/2021 at 6:47 PM, fettman1176 said:

I currently own 5 trooper T2's and have extra wheels. Are you anywhere close to Arizona?

Five T2s ? You are a man that must really appreciate the uniqueness of these things. You must also have a wealth of knowledge about the machine as well. Do you happen to know what the back-spacing is on the original wheels like he posted the picture of, both the 14x6 and 14x8? I have searched high and low trying to unearth that information. 

Dave Ramm Rookie

Dave Ramm

Posted
Posted
On 9/2/2021 at 11:55 AM, Mrusson said:

Hey gang,

    I am looking for a 14x6 wheel with a 4/115 bolt pattern with the 4+2 offset for my 2008 Trooper. I have always had a spare tire with my UTV's and I am struggling to find a steel wheel for use as a spare tire with this Trooper. Has anyone had any luck finding a plain steel wheel for use as a spare? My trooper uses the 14" allow wheels from the factory with 14x6 fronts and a 14x8 rears. I assume the 14x6 can be used front or rear as a spare. Thanks for any info you may have come across.

Well now I look like an idiot, totally missed your posting the offset for the 14x6.  I'd like to find out what the offset is on the 14x8 and the maximum  inside offset is you can run on the front before tie rod interference. I want to compile a list of other machines that have wheels that we can use/ interchange. It would be a good reference when you see used wheel tire packages for a different machine at a sweet price. It's always nice to be able to have a couple different sets of tires and wheels on hand for different terrain. 

  • 1 year later...
Nick Schilling Newbie

Nick Schilling

Posted
Posted
On 9/19/2021 at 6:47 PM, fettman1176 said:

I currently own 5 trooper T2's and have extra wheels. Are you anywhere close to Arizona?

Hello, I’m interested in purchasing an original front & rear wheel for my T2. If you’re interested please shoot me a text 619733800five

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • Steve Waldner
      Looking for a Kioti Mechron 2200
      By Steve Waldner
      Looking to buy a Kioti Mechron 2200
    • staind
      Joyner R2 2008 800cc ECM code reader Lite or OBD port install
      By staind
      Looking for information on installing a OBD port or a lite to read codes in ECM. 
      I can not find a OBD port or a lite to read codes on this R2 with 800cc. 
      I have code readers and adapters for most ATV's. From what I've found so far. They don't have a connection for to read codes. I may be wrong. That's why I'm asking. 
      This R2 has had new IAC, TPS, MAP, fuel pressure regulator and fuel pump replaced. This was done by neighbor to try to stop surging. It still surges on start up and then settles down. But once you hit the accelerator it revs up to 2000+ rpm and stays till you block off IAC port in throttle body with finger. Once you do that it once again settles down and idles perfectly.
      I want to know what the ECM is reading to help dio it.
      This joyner is the first one I've run across. Well second one in a week. (my neighbors 2 of them) The other was a trooper with the 1100cc chery motor that had been setting for years. After cleaning up the fuse box connections. It runs like a top. Had to replace all gages with aftermarket gages. Water, oil, gas, amp. Only problem one was the water temp using original sending unit. Had to install 150 ohm resistor on the input wire to get it to read correctly + - 5 degrees. Close enough. Gas sending unit was/is for a boat tank 6" tall. All SS so it should last forever. 
      thanks Dan D. aka staind
    • Greg Kilgore
      2021 Axis 500 Head Bolt Torque specs
      By Greg Kilgore
      Got a 2021 Axis 500.
      I'm needing the head bolt torque specs.
      Manual states 38nm.
      But saw a video Hisun put out on YT for a 550 stating 50nm + 45° turn of wrench. Didn't think they would be that much difference on a 500 and a 550.
      Seen another YT video on a 2013 500. He did 38nm.
      Really only want to do this job once and done. And done correct.
      Anybody got the answer?
      Going to start this rebuild in a few once this weather brakes. Flooding and then snow and cold here now. But spring is around the corner and the wife has to have this fixed or a Honda pioneer may be parked in driveway soon. She has to be able to ride.
       
    • Bloodhound
      Looking to purchase
      By Bloodhound
      Any info on the duribility and reliability of these  don't know the size
      And also 2006 rzr duribility and reliability 800cc
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...