Quantcast
Jump to content


Recommended Posts

Posted

I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next

  • 2 months later...
Posted
On 9/27/2021 at 7:50 PM, Jacob E freeman said:

I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next

I’m having the same issue with a 2017 550.  It’s in the shop now awaiting a new head gasket (that’s somewhere in neverland) according to shipping info.  Also a new water pump is to be installed.  Mechanics have repeatedly bled the system but after a few hours it overheats.   It has something to do with blow back.  Once it begins to overheat, the radiator and overfill jug is filled to the brim.   One mechanic opened the radiator cap and was drenched in the pressurized fluid!   The saga will continue if I ever see the head gasket. 

  • 8 months later...
  • 11 months later...
Posted

I have a 2018 750 eps that overheats just like the guys in previous post..I was wondering what they did to fix it...I took to shop that I bought it from five or six times and they said it's fixed.. It's not . Anyone have an answer for me.. Thanks...

  • 4 months later...
Posted

I had the same problem. Shaved the head, new head gasket, new water pump. Nothing worked. I ended up just buying a new drop in motor. But as I thought about it, I never checked to see if the water pump was actually turning. I am guessing that the chain that drives the oil pump and water pump spun off. If I ever find the time I am going to disassemble the old motor and find out. 2018 750 challenger crew. 

  • 11 months later...
Posted
On 11/19/2023 at 8:24 AM, Imtoorelaxed said:

I had the same problem. Shaved the head, new head gasket, new water pump. Nothing worked. I ended up just buying a new drop in motor. But as I thought about it, I never checked to see if the water pump was actually turning. I am guessing that the chain that drives the oil pump and water pump spun off. If I ever find the time I am going to disassemble the old motor and find out. 2018 750 challenger crew. 

What drop-in motor did you use?  Have you been happy with it? 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      Picked up an essentially new 2022 UT400 with 9 miles on it.  Decided to change the oil because it's probably never been done.  Pulled the dipstick and noticed it was overfull then went and pulled the drain plug and took off the filter and it was like brown water running out.  What should I start checking?
    • By LauraLB
      Thanks for the add.  I'm looking for ideas for a hard cab enclosure. I sure don't like the soft sides and zippered window.
    • By vachi
      hi everyone i have this 2021 Hisun forge 250 that won't start. no spark no fuel.   when i turn the key on i dont hear the relays click or fuel pump come on. it does have power but the relay doesnt ground the pump or the ignition coil. dont know if there are any safety switches on this model or not.  it does crank and all the accessories work. i  hot wired the pump and it does work.  i found a wiring diagram but it's very hard to figure out and was hoping someone has seen this before. all fuses are good. thanks in advance. 
    • By Robby
      Hello, I have a 2013 500 utv hisun. Was running ok and cut out while parked. Bike will not start now. It turns over, but won't fire. I have no spark and no fuel. I replaced fuel pump, ignition coil, spark plug, cdi, voltage rectifier and all the fuses and relays. Could bad stater cause no fuel because I can't hear the fuel pump priming. Any info on where to start looking for problem.
    • By Gerald Mohs
      Is the cam sprocket a bolt removal or is it pressed on? Dang bolt is on tight. Impact wrench won't even move it.

×
×
  • Create New...