Quantcast
Jump to content


Recommended Posts

  • Alex changed the title to 2020 Coleman 400 snow plow system
Posted

The Coleman (Hisun) 400 does not have enough power to plow snow; and attempting to do so would most likely destroy the drive train in short order.

  • Like 1
Posted

cliffyk, just curious.......why do you say the coleman 400 doesn't have enough power to plow snow, if a snow plow could be located?...........my mule is a 400, and it does an excellent job plowing...........

Posted
3 hours ago, Scott Meszaros said:

cliffyk, just curious.......why do you say the coleman 400 doesn't have enough power to plow snow, if a snow plow could be located?...........my mule is a 400, and it does an excellent job plowing...........

Mostly the fact that it doesn't. I drove mine over 1500  miles through Florid swamps and back country. It's a capable little beast, however it got bogged down in ale deep thick mud more than once--the drive train would not hold up to the rigors of snowplowing. The Hisun 400 is a recreational vehicle that can hit 45 mph flat out, the mule is a hardcore workhorse utility vehicle--different design goals. My 650 cc Ariens tractor has a small plow but you can't really plow much of anything with it.

  • 1 month later...
  • 4 weeks later...
Posted

I also purchased this plow from Amazon, cost less than $500, got a 5% credit on account and free shipping. Got it in 4 days from Texas to Michigan. Had to cut corners of mounting plate to clear suspension arms. After cutting plate install was about an hour putting all pieces together and getting on the utv. Works GREAT!

  • 2 weeks later...
Posted

Just had our 1st plowable snow for the season here in southern Michigan. After the highway department went thru for the first pass I took the Coleman UT400 with the 5' plow I had installed for its' first journey. We had approx. 4" with ice topping and after the plowing by the highway department is was approx. 8"-10" on the sides of the road. I  put the utv in 4x4, didn't really need it but the machine worked great for me. Don't know how it's going to work in wet deeper snow but for $500 what the hell. Good Luck!

  • Like 1
Posted

Moldman, Thanks for the update! Glad it worked it for you. Did the engine seem able to be up to the task, or did you feel it needed more power?

Cliffyk, in your opinion where would the failure be in the clutch, clutch cover or the primary clutch? Just trying to get as much info before getting one and have it fail. It would be replacing my 20 year old honda utv that has been bulletproof. I just don't want to spend 15 or 20K just to plow my driveway. Any info you can give would be greatly appreciated.

Thanks!

  • Like 1
Posted

Shaun B, I purchsaed the above snow plow system that you have listed. I installed it on Friday and got to use it on Sunday. I was plowing 4 inch snow with 10 inch drifts. went through it like butter in 4wd. could of eaily plowed a 10 inch snow. i also put two 70lb bags of sand in the box. it took about 7 hours for this old man to install. I am very pleased with that 6 foot wide plow and it is heavy duty..

  • Like 1
  • 2 weeks later...
Posted

I just plowed out of a 24 inch snow here in NE Ohio. I have a double wide 500 foot long driveway and my coleman ate the snow. I was able to clear it in about 20 minutes with snow mounds up to 10 feet. This little machine was a beast out there. Moreover it used my own homemade plow! I'm going to enclose it and add the aftermarket heater assembly. Then I can be nice and toasty plowing our neighbors driveways.

  • Like 1
  • 3 weeks later...
Posted
On 10/8/2021 at 10:13 PM, cliffyk said:

The Coleman (Hisun) 400 does not have enough power to plow snow; and attempting to do so would most likely destroy the drive train in short order.

I beg to differ,   I plowed 18 inches of snow in Michigan last week wet & heavy snow.    I had NO problems,   1st time I've actually put it into 4 x 4

Posted
On 10/9/2021 at 9:43 AM, cliffyk said:

Mostly the fact that it doesn't. I drove mine over 1500  miles through Florid swamps and back country. It's a capable little beast, however it got bogged down in ale deep thick mud more than once--the drive train would not hold up to the rigors of snowplowing. The Hisun 400 is a recreational vehicle that can hit 45 mph flat out, the mule is a hardcore workhorse utility vehicle--different design goals. My 650 cc Ariens tractor has a small plow but you can't really plow much of anything with it.

UTV Universal Snow Plow Kit, Coleman 400 Plow System. (theatvsuperstore.com)

  • 4 weeks later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By JOSEPH LAMAR
      I have a 2020 axis 500 and I have replaced the TPS twice and the whole throttle body assembly once and still have code 122. I can barely drive the thing. It bucks and surges like crazy
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By Will Sutton
      I've got a 2023 UT400 (bought from tractor supply) and I've been beating my head against a wall with it.
      It will start and idle perfectly. The second I touch the throttle it sputters and dies.
      I've checked that the fuel pump is working  (it is).
      I've replaced the injector, throttle position sensor, O2 sensor, and intake air sensor. All with no change.
       
      I've just taken a look a the schematic, and there is a crank position sensor as well.

      Could this be the source of my troubles? If so, where is this thing located? I can't seem to find it on any drawings from the parts suppliers.
×
×
  • Create New...