Quantcast
Jump to content


Recommended Posts

Posted

New to the forum. New to UTVs. New to Electric motors.  I just got a 2021 Hisun Sector E to help with moving stuff on my  steep 5 acre wooded mountain patch. Plus I thought it would be fun on the gravel roads in the "neighborhood". Because we are remote and part time to the property, I didn't want the hassle of dumping out old gas or messing with oil and filters and all the usual maintenance of a ICE. But the biggest reason for me was the noise. I test drove the Axis utvs at Tractor Supply Co and they were LOUD. Seemed to ride rough too. If you want quiet, then electric is the way to go. But it does come with a high price tag. And all the electric models are still in their infancy. So its a bit of a gamble too. I bought the property for quiet. I wanted to keep it quiet.

I liked that the Hisun had the dry cell batteries so there is no maintenance of checking and adding water. I'm a little worried about their lifespan especially after one person's poor utube review about them. But the dealer said the company took that to heart so hopefully changes were made for better batteries. There were no Lithium battery options available anywhere near me. Polaris is supposed to have one later this year. I liked that the Hisun came standard with roof, windshield, winch and trailer hitch. I have had the sector for only one day and worked it and road it good. So far I have a big smile on my face. I wish there was a category for this model on the forum here. Meanwhile, maybe folks will share their insights/ experiences on this thread. I'd like to learn as much about the sector e as I can. There isn't much info in the owners manual.

 

IMG-1398.jpg

  • Alex changed the title to 2021 Hisun Sector e (its electric)
Posted

I have a 2017 Hisun  Sector e.   It is the most frequently used vehicle (including cars) on our property.    I love the fact it is relatively maintenance free, and you can just get in it and go.... any time, any weather.   Looking at your picture I can see they haven't changed much in the last 4 years (tires and decals looks to be it).   I don't think I would like my rig for going exploring out in the woods because of it's limited range, but it is perfect for around home.    My batteries are getting worn and don't provide the miles that they used too, but I plug it in every night and it will still easily last a full day for whatever I may choose to do.    I only have a couple of minor complaints; 1) the long delay between turning on the key and the time you can put it in forward or reverse to go.  If you put it in forward or reverse too soon it just sets there until you put it in neutral for several seconds the go into forward or reverse.    Whenever someone new drives it for the first time they can't make it go because of this quirk.   No one will ever steal it because of this  😊  2) the emergency brake doesn't always release fully and I sometimes have to pull it up a little further with my toe before it will go.   Hopefully they have corrected those minor issues on the new ones

Posted

When new take it easy and light usage for about 20 charge cycles, if you do the life of the batteries will be longer. If you thrash it from new and heavily deplete the battery pack the life will be significantly shortened. Check all the battery and power connections regularly for tightness.  I do Li ion conversions on these in the UK, and all have huge amounts of crud under the seats between and down the side of the batteries, as well as under the floor in the drive tunnel hump.  It helps to clear that out regularly. The small belly pan can be dropped of and let some of the stuff out, but you have to lift the floor / tunnel to get that out.  I also change the bolts that hold the belly pan for std (although stainless) m6 screws, as for some reason they use screws with small heads, that easily wring round. Only use 6 point sockets on the originals, 12points will round off much easier.  Occasionally check that the fan on the charger at the front hasnt got clogged up with mud.

 

Posted
4 hours ago, EVSupport said:

When new take it easy and light usage for about 20 charge cycles, if you do the life of the batteries will be longer. If you thrash it from new and heavily deplete the battery pack the life will be significantly shortened. Check all the battery and power connections regularly for tightness.  I do Li ion conversions on these in the UK, and all have huge amounts of crud under the seats between and down the side of the batteries, as well as under the floor in the drive tunnel hump.  It helps to clear that out regularly. The small belly pan can be dropped of and let some of the stuff out, but you have to lift the floor / tunnel to get that out.  I also change the bolts that hold the belly pan for std (although stainless) m6 screws, as for some reason they use screws with small heads, that easily wring round. Only use 6 point sockets on the originals, 12points will round off much easier.  Occasionally check that the fan on the charger at the front hasnt got clogged up with mud.

 

THANKS !

Posted

Another question is the charging cable. The owners manual says use a 20 amp rated (120 volt) cord no longer than 25 feet. So that means 12 gauge wire. But it says nothing about the outlet. Most outlets are 15 amp with regular 3 prong plug. That is what I have on my deck where I plug in. BUT, a 20 amp extension cord will not have a regular 3 prong plug. They all switch over to that "tee" plug where one of the prongs goes horizontal instead of vertical. So that means these utv's must require a designated 20 amp outlet and circuit. But the dealer never mentioned that. I am pretty sure I was told I could use a "regular outlet". I think they should tell you that a 20 amp outlet will be needed.

I wonder how dangerous it is to use a 15 amp (14 gauge) cord of 25 feet through my outdoor grounded 15 volt (sorry thats a typo ...meant 15 amp not volt) outlet ??

Posted

The problem isnt the outlet. On small cables you get a big voltage drop under load. On other DeltaQ chargers (as used on the  Polaris Ranger EVs) they wont charge if the voltage drop is too big when the charger kicks in.

So you need an adequate cable size to reduce the voltage drop. Its not so bad for us in the UK as we have 240v mains and so dont need such large cable. It will charge from a regular power outlet, just not with a very long extension lead that isnt large enough.

What is an outdoor grounded 15volt outlet?

 

Posted
2 hours ago, EVSupport said:

The problem isnt the outlet. On small cables you get a big voltage drop under load. On other DeltaQ chargers (as used on the  Polaris Ranger EVs) they wont charge if the voltage drop is too big when the charger kicks in.

So you need an adequate cable size to reduce the voltage drop. Its not so bad for us in the UK as we have 240v mains and so dont need such large cable. It will charge from a regular power outlet, just not with a very long extension lead that isnt large enough.

What is an outdoor grounded 15volt outlet?

 

Im sorry that was a typo. I meant 15 amp, outlet. The problem is I cant find a 20 amp rated cable that has a standard 3 prong plug. It seems 20 amp cables all have the tee type plug.

Posted

Just get it made up. You really dont want it on a reel anyway, thats a temptation not to un reel it and thats a disaster. They will melt with a high continual load when still even partially coiled.  Its easier for us with 230v and access to decent 16a outdoor covered sockets. If you have access to 230v(or whatever your split phase is) then use that as the charges will work on 120/ 240. Smaller cable size / better availability.  This is whats ideal for us in Europe.

https://www.ebay.co.uk/itm/113729489250?

They are covered, and hold the plug in as well. So much safer than the system you have in the states. 

 

 

  • 1 year later...
Posted

 Sector E1 won’t take a charge, this is first time we’ve tried since getting it from dealer.  We’ve plugged power cord into 110, checked connections, are we missing the obvious?

Posted

The charger is at the front underneath the front compartment. On the drivers side is a power light and fault code display. The mains inlet is on the other end. You must have an adequate sized extension lead, (most are not) or the voltage drop causes the charger to not run. When plugged into the mains are you seeing any lights on the drivers side of the charger, is there a error or fault code being scrolled across the small screen. If you look under the seat you will see a cable with a white , black and green wire set. check these out, one will have the fuse attached to it. just follow the wires,check that fuse. If your mains plug is not a moulded one, check the connections inside. The key to not charging is to see the fault code.

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CapnWalleye
      Just picked up a Hisun 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • By CSM_Retired
      This is for all of you Kioti Off-Road UTV, SxS (Side by Side) owners. Discussions about Kioti Off-Road specific topics including the Kioti Mechron, K9, 2400, and 2440 models. 
    • By Homeowner A
      I was randomly and briefly able to connect to my Coleman UTV 400s ECU the other day twice and haven't been able to since.  When I was able to access it, I found the following codes and wondered if anyone may know where I should start or what I should look at?  
      P0031 - O2 Sensor Heater Control Voltage Low
      P0107 - Manifold Absolute Pressure/Barometer Pressure Voltage Low
      P0113 - Intake Air Temperature Sensor Voltage High
      P0118 - Engine Coolant Temperature Sensor Voltage High
      P0650 - Malfunction Indicator Lamp (MIL) failure
       
    • By Gorj
      I am going to replace the batteries in my E1. I am not interested in the high cost Lithium or the expensive 6 volt dry batteries.  I am considering four 12 volt deep charge marine batteries. I have a source for 810 amp units for about $100 each.  I have no worries about reprograming the charger because it went out a few years ago and I replaced it with generic golf cart charger. When I decide to do this, I'll keep you posted on the results.
    • By Homeowner A
      Is there a code reader available for the Coleman UTV 400?  I tried using the HUD ECU Hacker software and cables/adapters but no luck OBD to delphi 6 pin and KKL VAG as well as ELM327.  Will not connect.  I was able to get it to connect randomly a couple of times, but haven't been able to since.  I was able to clear and read the codes briefly.  I'm aware of the Tiny Scan 301 but it doesn't seem to be readily available.  There's a few out there but they are expensive.  
×
×
  • Create New...