Quantcast
Jump to content


Recommended Posts

Posted

I have a 2018 Massimo MSU 500. I was riding and it just shut down. No noise or anything. Got fire and fuel. It will not crank. Also timing chain is not moving.  Was wondering if anyone has run into this. If there was a cam sensor or any other sensor that would do this, or is the engine just done. Thanks for any information..

  • Alex changed the title to 2018 Massimo MSU 500 not cranking.
Posted

How do you know that it's getting fire, and fuel, if it doesn't crank over? Did you mean that it won't start?

If it cranks, you need to see if the timing chain is either broken, or the gears that it drives are slipping. Maybe it just lost the woodruff key?

Either way, I wouldn't count it out just yet. It could easily be something simple. 

  • 7 months later...
Posted

I could get spark if the crankshaft and stator are working, but if the camshaft is not turning then you could have a broken timing chain , a broken camshaft or the bolts backed off the timing gear that connects to the camshaft.  I have seen this situation many times on motorcycles.  Take off your camshaft cover and turn over the engine and you should find the problem right away, usually an easy fix.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By NC4wd
      Has anyone found a lift kit that fits an Axis 500? Mine is a 2021.
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
×
×
  • Create New...