Quantcast
Jump to content


Recommended Posts

Posted

I was wondering if anybody out their has had trouble with SEDONA Tires.

I purchased 4 each Sedona Rip-Saw R/T 28x10-14 and after 1500 miles they are showing large cracks on the side walls of the tires. Some of these cracks our 2 to 3 inches long and a 1/8 to 3/16 of and inch wide. There is up to twenty cracks on two of the tires. i do not dare drive on these tires no longer. Please help as i have lots of miles left on the tread. i store my bike in my garage. SEDONA tire told me that it was a LACK OF PROPER CARE. I clean my tires after every use. DONT BUY WHATEVER YOU DO,YOU WILL BE STRANDED AND THEY DONT BACK THEIR TIRES. I bought these tires from Rocky Mountain ATV believing they were bullet proof for mud, snow, and hard pack roads. I even talked my brother and friend into purchasing the same tires. My brother is seeing these cracks also and has a none repairable leak on the side wall were lug of tires wraps around. I just wish I would have found out more information about SEDONA tire before I made my purchase. I don't recommend purchasing SEDONA Tires.  

IMG_8656.JPG

IMG_8657.JPG

IMG_8658.JPG

IMG_8659.JPG

IMG_8660.JPG

IMG_8661.JPG

IMG_8662.JPG

IMG_8663.JPG

IMG_8664.JPG

IMG_8665.JPG

IMG_8752.JPG

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
    • By Browner010
      Recently I had an overheating issue on my 2022 Coleman Outfitter 550 (Hisun UT550) and to check to make sure it was fixed I took it out for a ride around the block. After a couple cycles on the LED coolant meter, I took it for a couple mile ride and on my way back I heard a loud metallic snap then a grinding noise. It was still able to move under its own power but very slowly. I was about 2 blocks from the truck so 'I limped it home and up onto the trailer. I know I need to tear it apart and look for what broke, but anyone have a guess as to where to start? I'm seriously getting tired of this damn machine! 750 miles on it and already replaced the belt, wet clutch, primary clutch, clutch roller weights among a few other things. Seriously, this friggin machine has spent more time on the lift than on the road. I thought I bought this new because it was from the owner of a tractor supply, but he registered it under the stores name making me the 2nd owner voiding any and all warranties.
      Any Ideas what to look for would be appreciated.
      Thanks
×
×
  • Create New...