Quantcast
Jump to content


2017 Cub Cadet Challenger 750 won’t start


reignma_n

Recommended Posts

Was driving the cub to work.  Cold out side so had it started for 15 min before I left.  Drove about 2 miles no problem then all of a sudden started to loose power, push gas to the floor to get off the side of the road.  Once turned off the road continued to put along so figured would get to a spot to be able to figure out.  Once I stop the engine died, and will just crank over and not fire.  Checked fuel filter no clog, has spark.  The oil was low but no light came on.  No sure if there is an oil kill switch or if the starting kill switch deal is malfunctioning.  Any help or ideas would be great.

 

Thanks

Link to comment
Share on other sites

Yes the spark is strong.  I will mess with the fuel supply lines this weekend.   One thing I noticed is that it has the safety start deal where the brake has to be pushed in to start, even to crank it over, now it does it without the brake on, so thinking that may have something to do with it.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By John M in Louisiana
      Quick question about replacing the plug.  One of the prongs pulled out, so I'm thinking it will be an easy fix to connect the old cord with a new plug but I'm unsure about the specs.  15amp 125v?  Is it more complicated than that?  I do plan to buy a plug that's water tight.
      Thanks in advance!
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By Callie
      We have replaced the relay/fuse, water pump, fan & radiator cap. What are we missing? Fan still won't kick on.
    • By Gary T
      I generally use my challenger for light duty misc. use, and for plowing. The one thing I dislike about this machine is the difficulty in shifting. I've had it the shop and they adjusted the shifting lever, but I still have issues. Some times it shifts ok, but the problem is it is hard to get it to move the lever from high to reverse or low to high or from any gear to the other. Seems I always have to accelerate a little to get it to engage to what gear I need it to go to. This is definitely not normal.
    • By Brett
      Fuel injected 700 starts great and idles great but touch the gas and it dies
×
×
  • Create New...