Quantcast
Jump to content


Recommended Posts

Posted

I have been looking at the different pull-behind implements for UTV/ATVs and am looking for advice/reviews on which ones to purchase. I already have a 44" Swisher Trail Cutter and a 60" Massimo Snow Thrower. The Trail Cutter is great, just wish I had the 60" one and the snow thrower is OK; I have to drive really slow with it or it will bog down. I have 14 Acres of over grown pasture land that was originally used for cattle and then horses. Over the past 20 years it has been neglected and is overgrown with weeds and bushes. I have a local farmer that is willing to rejuvenate  about 10 acres and start planting simple crops like hay, corn or soy. The other 4 acres I want to pretty up with lawns and trees but the land is rough. I have been looking at compact tractors as well, but am getting sticker shock just looking. I am new to this so I am not sure what equipment to purchase. Any experience and/or ideas out there?

Posted

Rent a skid steer with a mulcher attachment.  Looks like an oversized stump grinder.  We used them to clear out under power lines, which wasn't  done that often so trees would get to 6-8" in diameter and that thing would eat them up.  When you're done clearing just run it over the cleared ground and it's tilled and ready to plant.  

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By fishhouse3
      FOR SALE: 2021 CFMOTO ZForce 800 Trail with many extras and full warranty until 2027. Only 625 miles and 50 hours of use.
      In great condition, has a clean title and one adult owner. Has had all scheduled regular maintenance and has not been abused. Only used about six times on weekend trips to Hatfield-McCoy trails in WV.
      Under full CFMOTO Care bumper-to-bumper extended warranty until 8/2027 (paid $1,600). Full service and tune up just completed with new clutch, drive shaft, belt, rollers, etc (paid $1500). Plus it comes with over $3,500 in upgrades and accessories! Way too many included items to list here (see last pics for full details).
      This machine is ready to go and needs nothing - just hop in and hit the trails!  I have over $20k invested in this machine. Priced VERY fair to sell quick at less than half that!!!
      $9,999 WITHOUT warranty -OR- $10,999 WITH full extended warranty until 8/2027.
      Located in Chesterfield, VA 23832. Message me for more pics and info!





    • By Mark Anderhalt
      Question, Does anyone know if a 700-cylinder, piston, and head fit on top of a 500-bottom end, Although I have a 500 and have rebuilt the 500 once, I'm thinking the lower end may be the same for both the 500 and the 700. Does anyone have information on that?
    • By Kingfish
      The conversion took about 350lbs. off the vehicle.  It never rode great, but now I feel every  crack in the road.  I have backed off spring compression nut to the point just under where they would move around if suspension was at full extension, but it is still very stiff.  I would like to put some softer coilover springs on it, but I have no idea what the spring rate is with the original springs so I would just be guessing on what to order.  Does anyone have the data for the original spring compression rate?  I am willing to give up a little ground clearance for a softer ride. Right now when sitting still the rear suspension is at or near full extension and the rear tires have several degrees of camber which will cause uneven wear if allowed to continue in this state.
×
×
  • Create New...