Quantcast
Jump to content


Love your Massimo?

dorough

By dorough
in Massimo UTV SxS Forum

 Share

Recommended Posts

dorough Rookie

dorough

Posted
Posted

I just bought a Buck 450X... right before discovering this board and reading a lot of not-so-good posts. But I hope I'm right when I believe that the squeaky wheel gets the grease, and surely there must be plenty of happy Massimo owners out there and I don't need to return my new toy to Lowe's.

So... if you own a Massimo and like it, I'd love to hear from you! Please let me know what you like and enjoy about it and if you've had only minor or no issues - compared to other posts I've read.

Thanks!

Link to comment
Share on other sites
dorough Rookie

dorough

Posted
  • Author
Posted
29 minutes ago, T-boss 410 said:

Just FYI, there's some history between Joe, Tractor Supply, and Massimo. He will fill you in.

I've read plenty of his replies to others. I'm trying to get a feel for the positive side here; not looking for airing of complaints. 

Link to comment
Share on other sites
dorough Rookie

dorough

Posted
  • Author
Posted
42 minutes ago, TapBoss said:

Bought my 550 just about a year ago, no issues to date.  Most of the problems on here are from the earlier models that were Hisun machines, not from those that bought more recently when they switched to Linhai.

That's certainly good to know!

Link to comment
Share on other sites
Bill Hughes Enthusiast

Bill Hughes

Posted
Posted

Love mine.

Great success dealing with Massimo getting parts. 

Go to any manufacture's forum and you'll run into same thing... the whinners. Just like here. 

No one has yet made an indestructible machine. I once worked in a music store and the manger used to say "put a cast iron anvil on the demo floor and someone will make music with it and someone else will break it" 

  • Like 2
Link to comment
Share on other sites
BlueFlag Rookie

BlueFlag

Posted
Posted (edited)

I have had my TBoss 550 F (Linhai) for a year and a half. I've used it extensively and the only issue was the steering wheel screws loosened slightly. Big deal.

Updated 4/26/2024:

Been having some starting issues. The starter would stall then the engine would kickback against the starter with a bang. Was afraid that I would break the starter or damage the ring gear. So, I replaced the 300 CCA U1 Lead acid battery that was OEM, with a 350 CCA AGM U1 battery. That solved the occasional cold start stall and kick back against the starter. The OEM flooded lead acid battery is just too small. Works OK in my lawnmower, though. 😒

Issue resolved.

 

Edited by BlueFlag
New information
  • Like 1
Link to comment
Share on other sites
marineengineer56 Rookie

marineengineer56

Posted
Posted

I am a retired Diesel Mec. I drive a 2016 Kawasaki Mule Pro.  I bought a Demo from the Dealer.  First thing I did when I got the machine home was to take apart every connection I could find and added Dielectric Grease.  I took every ground connection apart, cleaned the metal surface with a BRASS wire brush, coated with dielectric grease.  I use the machine for Farm work as well as hunting.  Been through 3 ft of water with no issues.  That said, if you are having electrical issues, check your powers and grounds first.  Then you can trace down any issue's 

Link to comment
Share on other sites
Steve Herndon Newbie

Steve Herndon

Posted
Posted

I have a 2015 Massimo Alligator 700 Wide Body I bought used about 3 years ago. The only problem I've had is overheating. Then I learned how to bleed the cooling system properly and problem gone! Only complaint I have is it is hot in the summer. Has bucket seats with the engine in between. Nice in the winter when I plow snow. I've added a tip out windshield, rear cab encloser, back up lights off road lights and electronic power steering to it. I love it, it's a beast. Oh, and I put a real temp gauge on it, but haven't needed it since I got the bleeding issue figured out. Hope this helps. 

Link to comment
Share on other sites
T-boss 410 Experienced

T-boss 410

Posted
Posted
2 hours ago, Steve Herndon said:

I have a 2015 Massimo Alligator 700 Wide Body I bought used about 3 years ago. The only problem I've had is overheating. Then I learned how to bleed the cooling system properly and problem gone! Only complaint I have is it is hot in the summer. Has bucket seats with the engine in between. Nice in the winter when I plow snow. I've added a tip out windshield, rear cab encloser, back up lights off road lights and electronic power steering to it. I love it, it's a beast. Oh, and I put a real temp gauge on it, but haven't needed it since I got the bleeding issue figured out. Hope this helps. 

How did you bleed the air out?

Link to comment
Share on other sites
  • 2 weeks later...
  • 2 weeks later...
Steve Herndon Newbie

Steve Herndon

Posted
Posted

Sorry have not been on the forum since that post. I don't agree with running the engine while doing this. If the engine is at operating temp, the coolant is expanded. That's the reason it has a reservoir. If the cap is replaced while it' hot it will not be full when it cools down and can create an air lock in the system. I do mine with the front jacked up and engine cold and not running. Make sure the reservoir is at the full mark before you start. There are two bleeders for the system. One on top at what looks like a thermostat housing, and one on the lower part of the water pump. Bleed the upper one first, then go to the lower one and bleed. I complete this process at least one more time, making sure the radiator stays full. let the front end down and replace the cap. I have never had it overheat since I did it this way. I used to do it with the engine running and had problems a couple times. I asw this method on a youtube video and it made sense. Hasn't let me down yet.

Link to comment
Share on other sites
Skipper T Newbie

Skipper T

Posted
Posted

Just bought a T-Boss 410 for small hobby farm use and love it so far, have only had it month but use it every day.  Bought mine from Farm and Home and the guys there are great!  The speedometer didn't work but the service guys came to my place and fixed it.  Overall, very happy so far!   I got a gray colored one and am really pleased with the choice.

  • Like 1
Link to comment
Share on other sites
  • 4 weeks later...
BOW4UM Newbie

BOW4UM

Posted
Posted

I have a new to me 2017 Massimo MSU500 (760 miles 103hrs). Its been great so far and its exactly what I wanted.

I am and have been doing some minor customizations:

Line Xed the bed,  Light bar with dash switch,  2" lift, Hunting graphics,  1.5" tire spacers,   rear window and these items to be done soon - Rear Bumper, Quiet Muffler, Clutch Slugs, may put 10" rim on front like is on back and some sort of cargo bags.

My only real complaint is mechanically it could use a bit more torque on low end and aftermarket parts are limited. 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • shepdog
      2009 BMX UTV 500 Coolant hose
      By shepdog
      I just picked up a 2009 bmx utv 500, there is a small 'nipple' on the water pump, its barbed like a hose goes on it , where is that little hose Suposed to go? 
    • Qtband
      2015 Teryx Not Moving
      By Qtband
      I'm looking at picking up this UTV and this is what the owner says:
      "All I know about it is it runs. Display does not work and it will not move! Front end or trans could be locked up. It moves some, but does not sound good."
      My question is, what could the moving issue be, and how can I check it out when I look at it? I feel the price is right at $2000, but I'd like to know what I'm getting into.
    • onealmck
      2019 T-Boss 410 Will Not Start
      By onealmck
      I have a 2019 T-Boss 410 that died one day after we parked it. It had been getting harder to start (had to hold the throttle down) for some time but would not start. The starter clutch seized while I was trying to start it. I replaced the starter clutch and it will not start. It appears to have solid fuel pressure and solid spark. It "fires" but will not actually run. The exhaust gets hot after cranking so I know that's actually firing but it won't fully start. Any ideas?
    • Red Good
      Having trouble sorting out this massimo utv
      By Red Good
      Serial # a8mv86futja001002 , no search engine will give me a model , it has a 471 engine . Is massimo always hard to get hold of ? No answer to emails or phone calls ?
    • mac66
      2021 Axis 500 4 month Review
      By mac66
      I bought a used 2021 Axis 500 last April.  Low mileage and got it for considerably less than what they go for new.
      The first thing I did was change the oil/fluids and also put a new drive belt on it.  The only other thing I did to it was add a rear vinyl window that zips open and rolls up to keep the weather off.
      I used it on my 52 acre property to check trail cameras, service the food plots, haul fertilizer, seed etc etc. It's has a good size bed and is not too big or small.  It has worked well as a utility vehicle. 
      Other than using on the trails working around the property I haven't used it much off road...at least until last weekend when I went on 74 mile group ride around the county. In my state it's legal to ride on any road that's not a state or federal highway. The group started in town, rode about 30 miles on back roads to the state ORV trail system. Then did about 20 miles on the trails and then headed back via back roads to town.   
      It had rained for 2 days straight prior, so the trails were one mud hole after another.  It was very challenging.
      The good...
      -It worked fine, never had any kind of issue with it since I bought it.
      -It kept up with more expensive machines on the trails. I was the only one with a CCC (Cheap Chinese Crap) machine.
      -Fairly comfortable to drive.
      -The roof, windshield and rear window kept most of the rain off when it started raining in the afternoon.
      -Okay, I cheated. I peeled off the AXIS 500 stickers on each side. Everybody in the group assumed I had a Rhino. They didn't ask, I didn't tell.
      The not so good...
      -The horsepower rating on the 500-cc engine is 24 hp but it seemed underpowered. While I could go about 35 mph with the pedal to the metal on pavement and hard packed dirt roads the best I could do on loose packed roads was 27 mph. I had trouble keeping up with the others in the group.  It also bogs down on inclines in high gear.  On the other hand, in low gear and 4wd I didn't have any problems going through mud or sand or up hills.
      -It is LOUD! Had to wear shooting earmuffs to keep my ears from ringing while riding. Going to have to address that.
      Overall Impression...
      I was impressed with it on the trails, and it is a good utility vehicle for working around the property. Considering what I paid for it I am very happy with its performance.

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...