Quantcast
Jump to content


Recommended Posts

Posted

Folks, how do you possibly narrow down the many choices and options for a quality side by side.

something with power, built to last, 4 seater, for farm and camping and kentucky hills and mountains….

 

25k or less.

Posted

I really like the look of the kubota line also. There's several models, but the op suggested a 4 seater.  The 4 seat model looks like its a convertible to switch between a 2 seat, or 4. And it has a diesel engine available. That's definitely worth looking into. 

  • Like 1
Posted
17 hours ago, kenfain said:

I really like the look of the kubota line also. There's several models, but the op suggested a 4 seater.  The 4 seat model looks like its a convertible to switch between a 2 seat, or 4. And it has a diesel engine available. That's definitely worth looking into. 

Diesel engine may be better in his case for more torque, hauling 4 people plus any gear/load in the bed and hilly terrain.

  • Like 1
Posted

I think the diesel Travis mentioned would be an excellent choice. I have a diesel mule, and it's been a perfect fit for the tasks around here. But if I had to buy one again, I'd look real hard at the kubota.

  • 1 month later...
Posted

I have had good luck with my Kubota RTV-X1140 so far.  Diesel.  Can be both 2 seater (larger bed) OR 4 seater (short bed).  Takes 2 minutes to switch.  Hydro dump bed.   Easy to work on.    I paid 18k for mine a year ago.  Not sure what inflation has done to the price.

CC

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Topics

    • By CapnWalleye
      Just picked up a Hisun 500 that had shift issues (corroded fan gear) which I fixed. It also didn't seem to be running smoothly then all of a sudden it got worse. It seems to miss on both idle and when pushing the gas pedal to the floor and doesn't seem to be running at full power. I've been working with a local person who is walking me through some steps, but I'd like some input from this group as well. What I've done:
      - drained the fuel tank and replaced it with 93 octane fuel and added heet to help with any water problems.
      - replaced the fuel injector.
      - disconnected the battery (several times) to allow the module to reset.
      - set the valve clearance, both intake and exhaust, within specs ... intake was tight but exhaust seemed fine.
      - replaced the battery.
      - replaced the O2 sensor.
      Nothing has helped. Not sure what the next steps are, but would appreciate any expertise that can be offered here.
       
    • By SSgt1994
      Hello everyone, second time posted looking for assistance. First time you all were a great help!
      I have an 2013 XY Powersports 600GKE UTV, sweet little machine when she was running. My youngest last fall get it covered in mud, and then blew the engine. I mean she doesn't start any more, and we've even tried rebuilding it since he's in a Vocational School for Power Sports and Diesel course, but no luck.
      One of the other members (NVM"something") was really knowledgeable about the machine I had and the engine, all I can tell you is its a CFMoto. If I can't find a replacement, does anyone know if there is one that it can be easily swapped out with, or even minor modifications.
       
      Thanks!
      Myron
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By Robbie Wyre
      I'm working on a 2005 Cub Cadet side by side and I'm trying to remove the front two axles.  I have a slide hammer puller on the inner joint and with all my strength they will not budge.   Anyone have the same issues and is there something I'm missing or a trick of some sort to pull these out?   Any suggestions please and thank you.
    • By Prepper
      Hello All...
           Just bought a 2014 Massimo 500 UTV.  It;s not running at the moment, but hopefully will soon.  I need a seat for it also (passenger side, if it makes any difference.)  It is a crank-but no start situation.  Just now starting to read the boards for solutions.  Apparently these models are well known for this issue.  If anyone has any suggestions, please feel free to chime in, it would be greatly appreciated.
      Thanks 
×
×
  • Create New...