Quantcast
Jump to content


Recommended Posts

Posted

I just joined this forum looking for suggestions. My 2014 Volunteer runs about 5-10 minutes and then the engine temp light comes on. I have checked coolant and oil but that’s as far as my limited knowledge can carry me. Any suggestions will be appreciated.

Thanks.

 

Posted

Does the cooling fan come on at all? If not, there's the issue to track down as to why. Could be that the fan motor has given up the ghost, or a solenoid has gone bad, loose or broken wiring, etc. If the fan does come on, you could have a bad thermostat, or the sensor at the radiator that signals the fan to turn on and off could be bad. There also may be an air pocket in the cooling system, which will cause the issue you describe. For the air pocket, you need to locate the bleed screws and bleed the air out. You will also probably have to elevate the front end to assist on removing the air.

That's all I know, which I mostly picked from others on this forum. Hopefully someone else will chime in to add to this.

Good luck!

  • Like 1

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By JSwearer
      Does anyone have any suggestions for aftermarket shocks.  I have a T-Boss 550 and took it riding in some rough trails and the stock suspension was uncomfortably rough.
      Thanks
    • By tskm
      in desperate need of a rear differential for my 2014 wildcat 1000. It has blown up right in the midst of the hurricane that struck us here in N/W N.C. I could really use this machine right now. No luck finding this from Artic Cat or the many numerous online vendors. Any info or resources wil be greatly appreciated !
      Tom 
    • By MMaster
      does anyone know of a replacement temp gauge that will work on a joyner 2016 r4, my gauge has condensation in it and it quit working
    • By MMaster
      looking for a replacement  temp gauge that will work with my joyner r4 
    • By Reynolds Rocket
      I have a 2017 Intimidator XD4 800cc 4x4.  It will run great and then it's like it goes into safe mode and only runs on 1 cylinder.  It's not fouling out the plug when it happens.  Some times when I stop and restart it, it works fine.  First I thought it was a spark issue, then a fuel issue, but I feel like it's a short in the wiring some place. 
×
×
  • Create New...