Quantcast
Jump to content


Recommended Posts

Posted

Just purchased a Coleman UTV 400.  Drove off trailer and parked with no issues. Put some gas in the tank, and went to use it, and it beeps when shifting into F or R. The parking brake light may be on, and not sure fuel gauge is working. I’ve ensure the brake is releasing, and I put 5 gallons in, so I’m baffled. Are one of these the issues or does something else cause the beeping?

  • Cujomike changed the title to Coleman 400 Warning Beep when shifting to F or R
Posted

Sounds like it is the parking brake warning. Mine is a 2021 400 and if you shift to F or R with the parking brake on it starts the beeping noise. I would check the adjustment for the parking brake and see if the safety switch is out of adjustment. 

  • Like 1
  • 1 year later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Homeowner A
      I have a Coleman UTV 400 and looking for something to store it in.  Preferably something vinyl or plastic with its own base that can stand alone outside and house the UTV.  I think the dimensions of the UT400 are around 106" long 52" wide and 74" tall. 
      What should I consider that won't break the bank?    
    • By Nutcase
      I have a Joyner Trooper 1100 4 place that has been sitting for a number of years. I have everything taken care of but i can't get the fuel through the injectors. Fuel pump puts full pressure on them but they don't turn on or spray fuel. Any ideas?
    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By Howard Elmore
      I have owned mine for a couple years now but newer took off road.  How well does it do trail riding m?
    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
×
×
  • Create New...