Quantcast
Jump to content


Recommended Posts

Posted

Is there a way to get the 2021 HISUN 700 to 60 mph on pavement?   Are there after market items that anyone has that will get this fun UTV so I can take it to town?    Thank you for any advice.  My top speed is 50 miles per and the road to town is 60.  

  • 8 months later...
Posted
3 hours ago, Joe Breaux said:

where are you that allows ORVs on public streets at 60mph?

Joe, I am privilidged to live in the great state of Montana.  My license plate costs a one time fee for life of $218 with the Off Road Sticker.   I actually can drive the road to town in my UTV at any speed but the speed limit is 60 Mph and everyone drives it at that or higher speed.  So I would like to be at the flow of traffic.  In Montana you can drive your UTV on any Montana road at any speed. If you drive at less than 25 MPH you have to have a Triangle Sign on the back.  You have to have lights, reflectors and at least one red light on the back of your UTV to drive at night.  Baughes

Posted
On 2/5/2023 at 4:03 PM, lincolnsq175 said:

Jbs machines sheave kit will give you more top speed.

Rhino 700 kit will work.

Thank you!  Looks like I might be able to hit the 60 MPH I need to go with the flow of traffic.  

  • 5 months later...
Posted
On 2/5/2023 at 7:03 PM, lincolnsq175 said:

Jbs machines sheave kit will give you more top speed.

Rhino 700 kit will work.

Hello All.  I am unable to find any other references to the 'Rhino 700 kit' other than water pump and engine rebuilds.  Is anyone able to provide a link?  Thanks in advance!

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Ductking1
      I recently purchased a 2024 Hisun 550 Sector from Kreps Service Station and am having issues with the gear selector, I am doing as instructed in the owners manual but the shifter acts like it is binding or the button lock isn't releasing, the shifter will not move, I have to wiggle it back and forth while pushing hard on the brake and if it's in park or reverse it's nearly impossible to get it to move, I contacted Justin Krep and he says this is normal with these machines, I find that hard to believe, I've owned many utvs and side x sides and have never had this kind of issue with any of them, any help with this problem would be greatly appreciated.
    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • By Justine
      I've had a Hisun Vector E1 for just a bit longer than is required for me to do some maintenance. While it's well-overdue, it only drives 1.5km a few times each week on a fairly decent gravel road (to the letterbox), and it has worked really well right from the get-go.
      Looking at the manual it states that I need to use SAE80 API GL-4 Hypoid Gear Oil for the Main gear Case, and SAE80 API GL-5 Hypoid Gear Oil for the Front gear Case - unfortunately i can't find either of those online here in Australia. Plenty of options that look close, but, as someone who has never driven any vehicle before, I want to use the right thing and it's a tad confusing.
      My question: Since there are no oils that are bang on SAE80 (they all seem to cover a range) would Liqui Moly Hypoid GL4 Gear Oil 80W-90  & Motorex Hypoid GL-5 Gear Oil 80W90 - be ok to use? (Or any other suggestions of what I might be able to purchase online in Australia) And would I have to drain out any existing oil from both gear cases?
      This is a whole new world for me and  being able to find exactly what is specified in the manual hasn't made this easy!
    • By se3388
      Hopefully someone else will buy a UT10X and join in.
       
      Steve.............
×
×
  • Create New...