Quantcast
Jump to content


Do it yourself maintenance

Roadstar515

By Roadstar515
in Hisun UTV SxS Forum

 Share
Go to solution Solved by Roadstar515,

Recommended Posts

  • Solution
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
  • Solution
Posted

Just talked to Hisun and they said I could do the oil changes but to make sure I purchase the Hisun oil filter and use a good quality 10w40 wet clutch motorcycle oil. I new about the oil, but wanted to make sure about the filter. With that said by following that guideline, it won’t void your warranty if something happens during that period. I don’t like not being able to do my own maintenance.

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
19 hours ago, Roadstar515 said:

Just talked to Hisun and they said I could do the oil changes but to make sure I purchase the Hisun oil filter and use a good quality 10w40 wet clutch motorcycle oil. I new about the oil, but wanted to make sure about the filter. With that said by following that guideline, it won’t void your warranty if something happens during that period. I don’t like not being able to do my own maintenance.

 

I used Mobil 1 4T-10w-40 when I owned a Coleman (Hisun).  There was a noticeable improvement in the shifter and sound of the machine.

Oil filter was difficult to find.  Finally found one for the 550 on Amazon:

 

https://www.amazon.com/gp/product/B01N2UIZT6/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
18 hours ago, mcraigchr said:

image.thumb.png.6b8e9199ea4f00ee148d6590da7bfa22.png

Just happened to notice in my service manual the recommended oil weight is 10W30 and it doesn’t mention synthetic. I’m a firm believer in synthetic oils, seeing I use them in all my vehicles that call for that. I’m going to call Hisun and see what they say. I’ll let you know if your interested and if not no biggy 

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
52 minutes ago, Roadstar515 said:

Just happened to notice in my service manual the recommended oil weight is 10W30 and it doesn’t mention synthetic. I’m a firm believer in synthetic oils, seeing I use them in all my vehicles that call for that. I’m going to call Hisun and see what they say. I’ll let you know if your interested and if not no biggy 

 

IIRC, my manual also said 10-30.  Living in Texas (hot summers), I have always believed that stepping up in viscosity never hurts anything.  After 40+ years, I have never had an issue in any of my vehicles or toys.  But ultimately, it's your call.

Don't mean to be a negative nancy, but based on my experience, you will have other issues with your Hisun long before you have issues related to oil viscosity.

CC

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted

Oh no problem, I get it. I’m an Amsoil guy so I understand where your coming from. Buts that’s a whole different animal if you know what I mean. I had added another post about valve adjustment at 20 hours. Do you care to comment. And thanks for your input, I have an opened mind and willing to listen. This is how we all learn the good and bad. Just sorry I wasn’t on this forum earlier, I would have purchased something else for what I read, lol

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
51 minutes ago, Roadstar515 said:

Oh no problem, I get it. I’m an Amsoil guy so I understand where your coming from. Buts that’s a whole different animal if you know what I mean. I had added another post about valve adjustment at 20 hours. Do you care to comment. And thanks for your input, I have an opened mind and willing to listen. This is how we all learn the good and bad. Just sorry I wasn’t on this forum earlier, I would have purchased something else for what I read, lol

 

I never adjusted the valves.  I traded mine for a Kubota after 80 hours.  I did so because I had 3 lab reports run on the oil.  It was eating itself from the inside out.  I dumped it before I got stuck with a boat anchor.  My advice would be that you get the oil analyzed.  I use Blackstone Labs.  They will mail you a collection kit.  You mail it back to them.  You get a report that shows all of the details and he explains what they mean.

https://www.blackstone-labs.com/

CC

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted

Well that’s exciting news, NOT!!! Really not looking forward to that. Maybe if I run 10W30 it won’t happen (lol) just kidding. I’m still wondering if the valves really need to be checked like the book says or it’s just another way to get it in the shop for more revenue. My use for this machine is just to drive it around the neighborhood with the wife. It will probably never see dirt seeing I bought it for her. Don’t see us playing hard but it may not take that either from what I’m reading. We would have got a gas powered golf cart but they can’t make it up the inclines we have in the Georgia mountains

Link to comment
Share on other sites
mcraigchr Enthusiast

mcraigchr

Posted
Posted
5 minutes ago, Roadstar515 said:

Well that’s exciting news, NOT!!! Really not looking forward to that. Maybe if I run 10W30 it won’t happen (lol) just kidding. I’m still wondering if the valves really need to be checked like the book says or it’s just another way to get it in the shop for more revenue. My use for this machine is just to drive it around the neighborhood with the wife. It will probably never see dirt seeing I bought it for her. Don’t see us playing hard but it may not take that either from what I’m reading. We would have got a gas powered golf cart but they can’t make it up the inclines we have in the Georgia mountains

 

Well, as my aunt always tells me "don't borrow trouble".  You may not have a lemon like I did.   Getting an oil analysis will protect at least some of your investment if it turns out to be a similar situation.  At least you will know that you need to take steps before it completely seizes up.  I wouldn't worry about the valves right now if it were me.  You would know if they were way out of whack.   Engine bogging down.  Loss of power when it warms up. etc.

I hope you have better luck than I did.

CC 

Link to comment
Share on other sites
Roadstar515 Enthusiast

Roadstar515

Posted
  • Author
Posted
5 minutes ago, mcraigchr said:

 

Well, as my aunt always tells me "don't borrow trouble".  You may not have a lemon like I did.   Getting an oil analysis will protect at least some of your investment if it turns out to be a similar situation.  At least you will know that you need to take steps before it completely seizes up.  I wouldn't worry about the valves right now if it were me.  You would know if they were way out of whack.   Engine bogging down.  Loss of power when it warms up. etc.

I hope you have better luck than I did.

CC 

Forgot to ask you, what year was yours and size

Link to comment
Share on other sites
  • 4 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • didgeridoo
      Hisun Sector e1 Battery replacement: any tips?
      By didgeridoo
      Hello, All!  I've decided to replace the traction batteries in my 2018 Sector E1 with a 48V Lithium set. They may be expensive, but I figure the Discovery Dry Cell are, too. I am not looking for the max driving range, as I have never received near the brochured range to begin with, but a good mix of charge/ get work done/ charge is what I am expecting.
      I have settled on the 48V EAGL kit from bigbattery dot com. Each battery pack provides 30Ah. The kit ships with a charger, as well. The packs would be physically connected in parallel (using a busbar) to one another, maintaining the 48V voltage, but together would be able to provide the amp draw the buggy pulls when going up hill or towing a rake (rated 320 max continuous Amps). This is in comparison to the serial connection the eight 6V lead batteries. Each of the EAGL batteries looks to have its own BMS; am I correct in thinking I will have to use their included charger rather than (simply) changing the onboard charger to lithium mode? The chemistry of the pack is LiFe PO4, for what it's worth.  I haven't torn anything apart yet (to diagram), so  I am not sure how the dash will interpret the AMP draw, but the kit I am looking at includes a dash mounted charge indicator.
      If anyone has completed a similar conversion, do you have any tips? Specifically, how did you remove the original batteries, and how did you secure the new ones? I am guessing that almost any change from the stock batteries would involve at least some modifications. Any tips would be appreciated, especially things I may have failed to consider. Thanks!
    • Pilot1996
      27” Tires 2022 800sx LE
      By Pilot1996
      When researching the Tracker, I was interested in the 800SX LE. The original sales literature indicated that the LE came with 27x9x14 and 27x11x14 tires. When I went to pick up my Tracker, it had 26” tires on it. I called Tracker before paying for the Tracker and was told they had supply issues and could not get 27” tires. I’m curious to know if anyone has taken delivery of an LE with 27” tires in stalled? I just recently installed 27” tires and am happy with the added ground clearance and beefy look the machine has taken on!
    • kgs
      2019 Hisun Sector 550 Hard Starting
      By kgs
      Got a hisun sector 550 2019 that's got 5900 Miles on it, this year it started to getting hard to start in morning, once I get it started it works good the rest of the day. But to start it in the morning I got to hold the gas pedal to the floor and it will fire up. I replaced the fuel injector but didn't help it. So I just ordered a new air filter and 02 sensor and a maf sensor to put on it to see if this will fix it. Anyone else had this problem. I'm hoping the parts I ordered will fix it. I also bought a new battery to put in it also.
    • Anthony Vigil
      2021 Hisun 700 grease fittings
      By Anthony Vigil
      Can anyone tell me how they grease the drivelines ?  Can’t grease the u joints. Do you need to take the driveline off ? 
      And are they easy to take off?
      Thanks
    • Bill12345
      2022 hot seat Pioneer 1000-5 trail
      By Bill12345
      🙂 2022 hot seat Pioneer 1000-5 trail

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...