Quantcast
Jump to content


Recommended Posts

Posted

For those thinking of upgrading your air filter here's a part number you may find useful. It's a K&N filter number KNRU-3610. It is slightly larger but slips right on where the stock one goes.

Unlike the stock filter, this one will keep out sticks, rocks, and low flying birds. Cost is about $35.00 (US).

I hope this information is helpful for those looking to make a change.

Gumball

Posted
I watch for stuff to add here and EDIT this post to add stuff

OIL FILTERS Fram PH3593A, PH6607, Napa #1348 gold filter with metric thread, 20x1.5mm

According to Russ, the new units use the ph4967 and Wix 51394, with std. thread, 3/4x16

Alternator Belt 14mmx 755mm replacement that works....Carquest #K040292

SPARK PLUGS NGK Iridium BKR5EIX-11, NGK 2387, NGK BKR7ES-11, Bosh 3311, Denso Iridium plug 5310 IK22

AIR FILTER K&N RU-1000, RC-4160, and another link http://aempower.com/ViewCategory.aspx?CategoryID=93

PRE FILTER KNN-RC-4160-DK prefilter

CV Boot Kit, Autozone part # 03606. Comes with bands and grease for $11.99.

Napa 686-2181 CV Boot from a 95 Geo Metro.

Tie Rod Dust Boot, Checker Auto#13566 2274262840104282158sivWwQ_th.jpg Electrical Power 2491277900104282158TFnBlI_th.jpg

Oil Drain QuickOilDrainValve.com http://www.quickoildrainvalve.com/SearchResults.asp?Cat=210

15 inch Wheels http://www.visionwheel.com/default.aspx?id=81

ITP has one now also, getting info. http://www.itptires.com/utilityatv/ss212.html NEW

14 Inch Tires That fit our Stock Wheels

http://www.jcwhitney.com/INTERCO-SUPER-SWA...16152_10101.jcw

http://www.quadratec.com/products/92610_2XX_PG.htm

http://www.1010tires.com/tire.asp?tirebran...pen+Country+A/T

http://www.quadratec.com/products/92610_7XX_PG.htm

General Grabber AT2 27x8.50 R14 95Q 6PR OWL $90.10 http://ssl.delti.com/tyre-pictures/General/GRABBERAT2.jpg

National Chaparral A/P 27x8.50 R14 95Q 6PR OWL $113.80 http://ssl.delti.com/tyre-pictures/National/ChaparralAP.jpg

Kumho Road Venture MT-834 27x8.50 R14 95Q 6PR OWL $110.30 http://ssl.delti.com/tyre-pictures/Kumho/R...ntureMT-834.jpg

Mastercraft COURSER A/T 27x8.50 R14 95Q 6PR OWL $87.00 http://ssl.delti.com/tyre-pictures/Mastercraft/COURSERAT.jpg

Cooper Discoverer LT 27x8.50 R14 95Q 6PR OWL $99.60 http://ssl.delti.com/tyre-pictures/Cooper/discovererlt.jpg

Laramie Performer RV 27x8.50 R14 95Q 6PR OWL $100.70 http://ssl.delti.com/tyre-pictures/Laramie/PerformerRV.jpg

ITP MUD LITE XTR 27-9-14 $87.99 http://fstg.motosport.com/motographics/ima...7mudlitextr.jpg

ITP TERRACROSS R/T 26-9-14 $144.99 http://fstg.motosport.com/motographics/ima...7terracross.jpghttp://www.superatv.com/DOMINATOR-UT...of-4-P237.aspx

Manuals and Information

http://www.teamjoynerusa.com/partslist.html

http://www.megaupload.com/?d=Z034LVQN - You need to wait for 45 seconds

http://www.teamjoynerusa.com/news_designs.htmlNEW

http://www.teamjoynerusa.com/news_releases...ll_pressure.pdf NEW

Supplier of parts in General

Of course there is Joyner's Shop online https://teamjoynerusa.3dcartstores.com/

Joyner\'s Cross Reference List https://www.teamjoynerusa.com/CAHNGE_OVER_LIST.pdf

SUMMIT RACING

TireRack.com

http://www.grainger.com

http://www.mcmaster.com/#

http://www.discounthydraulichose.com/

http://www.alliedelec.com/

http://www.rotaxparts.net/scripts/prodList.asp K&N filter & other things, sells to utralight aircraft market

Gumball, do you think that air filter should be added to the parts list?
Posted

Hi Kinarfi,

I looked at the specs for the air filter and the one you have listed is better than the one I found. The difference is the one you listed appears to have more surface area and the flange is a smaller diameter. For some reason my trooper has a rubber piece over the intake tube which accounts for the flange difference.

I'm sorry I didn't see your list sooner. It could have saved some research time. If you don't mind I'll share your list with Ken at Joyner.

Have a great day!

Gumball

[email protected]

Posted
Hi Kinarfi,

I looked at the specs for the air filter and the one you have listed is better than the one I found. The difference is the one you listed appears to have more surface area and the flange is a smaller diameter. For some reason my trooper has a rubber piece over the intake tube which accounts for the flange difference.

I'm sorry I didn't see your list sooner. It could have saved some research time. If you don't mind I'll share your list with Ken at Joyner.

Have a great day!

Gumball

[email protected]

Don't mind at all, and I welcome suggestions of items to add. Always trying help and get help. Same for the other members here, that's what makes this such a great site.

Thanks, Kinarfi :D

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Jim Kessell
      2005 American Landmaster
      EH65 Subaru Robins
      spits fuel from breather hose into the air cleaner and then down into carb.  What’s causing this ??
    • By Jacob E freeman
      I have a 2018 cub cadet challenger 750 I bought brand new almost 2 years ago the first month I had it the exhaust broke and burnt the spark plug wire in two that was a recall so the dealership installed the new one it had a different design and it bolted up to the bottom two plugs below the spark plug the dealership said they had to Adjust the exhaust valves I get the machine back thanking everything is good now wrong not even a week after I get it back the timing chain tensioner comes apart inside the motor I take it back to the dealership They put one on I get the machine back thanking everything is good but then just like before not even a week goes by when I was riding the Machine automatically quits going come to find out the wet clutch was burned up the primary clutch head stripped off of the splines I get that fixed and then  it overheats I take it back they bleed the air out of the coolant they bring it back to me the same day that I get it back it overheats again I take it back they temporarily fix it again just enough to let the warranty run out and now the machine has been to multiple different mechanics I have had them try to bleed the air out they have stood it up on its end I have had the water pump changed I have had the fan hooked to a switch so I could leave it on all the time but still almost 2 years later not even 200 hours on the machine and I cannot ride it The dealership will not take it back as a lemon I have tried I am at my wits end I have no clue what to try next
    • By TPlummer
      We recently purchased the Axis x550. Fueled it with 93 fuel and drove one time around the farm and the 02 fault error appeared. Any ideas? 
    • By 2scoops
      I am in need of an IAC for my throttle body. I contacted JMC and they said I had to buy the whole throttle body for $209. I left a message at Joyner USA...they haven't called back. I found a Chinese company which have them for $17, but shipping is $32. With that I still have to hope it is the correct one which arrives.
      Does anyone happen to have one laying around they would sell?
      I understand a workaround would be to eliminate it and use the idle screw. I believe that would cause problems with cold start ups??? Elevation changes???
    • By Jon Spruill
      Hey Guys, I have been chasing a stalling condition for about two weeks now. The bike will crank up and idle fine, then after about 20 seconds it will fall on its face and stall. It happens at both idle and while running at various rpms. You can turn the key off, turn it back on and it will fire right back up without trouble. I have verified spark on both cylinders with a spark tester. I have also added an inline fuel filter, and pulled the injectors to verify proper pulse on each. Things I have replaced - (relearn procedure performed after each component replaced): spark plugs, ECU, relay/fuse box, fuel pump, & throttle position sensor - all with no improvement of the condition. The only warning light I get when the condition occurs is the oil lamp. The bike only has 14 miles. I am at a loss and appreciate any help and suggestions! Thanks
×
×
  • Create New...