Quantcast
Jump to content


Recommended Posts

Posted

Hi I’m new to the forums scene here and I wanted to know if anyone here knows anything about the Hisun 1000cc v-twin motors. I just purchased a used 2015 Massimo Militia with 300 miles on it. I’m attempting to rotate the crank on this motor and it’ll only rotate about 90 degrees and then completely stop. I can rotate the crank in the opposite direction and then it stops at about 90degrees back to where I initially started from. I have the clutch cover off, the stator cover off, both valve covers and both spark plugs pulled. And there is no obvious signs as to what happened to this motor. 
 

I don’t know if anyone else has had a situation like this with their 1000cc or maybe even the 800cc motors. I’m rather stumped and wanted more info if anyone has any to share. I just want to get to the bottom of what happened to this motor. 

Posted

Is it an overhead valve motor? Sounds like one or more of the valves is stuck open. Or, there's something in one or both of the cylinders. You could remove the heads, or maybe one of those snake cameras would give you some idea.

  • Like 1
Posted
11 hours ago, T-boss 410 said:

Is it an overhead valve motor? Sounds like one or more of the valves is stuck open. Or, there's something in one or both of the cylinders. You could remove the heads, or maybe one of those snake cameras would give you some idea.

Yep I actually discovered the problem late last night. The connecting rod in the rear cylinder is broken. I had help rotating the crank and I saw the piston wasn’t moving in that cylinder with another person rotating the crank. I was actually able to use a small screwdriver and pushed down on the piston in the bore. So it would seem I’ll have to pull the motor and tear it down to see what I’m really dealing with. What scares me at this point is I can’t find parts for this motor. 
 If anyone has any insight it would be appreciated. I’d hate to have to spend $4K on a new powertrain on this thing. 

Posted

I was about to type BROKEN ROD , when I read your next post..  thats not good.. you need to tear down and see what else it damaged .. cylinder, head, crankshaft ... and why it failed. I see you said it only has 300 miles?   Massimo.... strikes again ... Good luck, hope its not too bad 

Posted
7 minutes ago, Joe Breaux said:

I was about to type BROKEN ROD , when I read your next post..  thats not good.. you need to tear down and see what else it damaged .. cylinder, head, crankshaft ... and why it failed. I see you said it only has 300 miles?   Massimo.... strikes again ... Good luck, hope its not too bad 

Yeah the more and more I look at this thing, the more I think the previous owner(s) beat the hell out of this poor thing. I’m surprised that the only thing I see missing from the thing is a fender flare on the right rear. But I’ll be tearing into it soon. Didn’t want a big project but at this point it’s paid for and sitting on my driveway. 

Posted

yeah, Massimo cannot take a lickin and keep on tickin.. in fact, even if you baby them, they are trouble prone .. Mine was in the shop 6 times in the first year.. Massimo never paid one cent of warranty work..  Their "authorized" repair shops wont touch them unless you pay cash up front because Massimo wont pay them. 

Posted

never said I baby mine.. I said it doesnt make a difference. because other have.. They still break. . and mine went no where for months except the repair shop.. it would run for maybe a 1/2 hour or an hour.. back to shop.. ALL AT MY EXPENSE.  I run mine in the mud but I do not abuse any motor.. ever.   I have pulled a couple others out .. But I have been towed too.  

Posted

Don't get the wrong impression, Joe. I didn't mean to say that you were hard on yours, just that while some were stuck or broke down, yours kept on going. I know about the warranty stuff, but you gotta admit, it does go better than some other big name brands at times.

Posted

no worries.... And yes, it does very well now but its 1/4 Yamaha parts now! lol  !  My buddies have Hondas and Kawasakis.. Now on flat dry ground they can smoke me  my 42 mph is just not in their league.  but in the mud, Mine can match either of them 

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By Frank in MI
      Thanks for accepting me!
      Haven't got a side by side yet, but have been shopping.   
      Any advice welcome & I am on a limited budget, so haven't decided yet on new or used.
       
    • By hisun junk
      As I tried to do a conversion with the Yamaha 660 motor, I realized the 660 was never fuel injected so it would not work for the fuel injected hisun motor swap. But the good thing is the hisun 750 motor is a clone of the 660 Yamaha but with the components for the fuel injection (cam/crank position sensor). So that left me with a new rebuilt Yamaha 660 and still a broke 750 hisun motor. I took apart 750 think the timing chain had broke from all that I've heard about these motors. The chain was not broke, but just off cam and crank gears! The chain tensioner was at fault!  I've ordered Yamaha 660 replacement parts, chain, two exhaust valves (which got bent when chain came off while motor was spinning) and seals. The piston has 2 little nicks where it had hit valves but no damage otherwise. The head is being redone at the machine shop and I'll be putting it back together in the next couple of weeks. Also I finally tracked down a Service Manual with all the info on the 550/750 Challenger.

    • By SouthernGypsy
      We have a 2018 Cub Cadet Challenger 400 and I found this Internally Threaded Bolt with a 10mm head size laying in the floor of the shop bay here on our ranch where we park the Cub Cadet.
      Trying to figure out where it belongs...
       




    • By Justine
      I've had a Hisun Vector E1 for just a bit longer than is required for me to do some maintenance. While it's well-overdue, it only drives 1.5km a few times each week on a fairly decent gravel road (to the letterbox), and it has worked really well right from the get-go.
      Looking at the manual it states that I need to use SAE80 API GL-4 Hypoid Gear Oil for the Main gear Case, and SAE80 API GL-5 Hypoid Gear Oil for the Front gear Case - unfortunately i can't find either of those online here in Australia. Plenty of options that look close, but, as someone who has never driven any vehicle before, I want to use the right thing and it's a tad confusing.
      My question: Since there are no oils that are bang on SAE80 (they all seem to cover a range) would Liqui Moly Hypoid GL4 Gear Oil 80W-90  & Motorex Hypoid GL-5 Gear Oil 80W90 - be ok to use? (Or any other suggestions of what I might be able to purchase online in Australia) And would I have to drain out any existing oil from both gear cases?
      This is a whole new world for me and  being able to find exactly what is specified in the manual hasn't made this easy!
    • By Poppateets
      I just purchased a used 2023 Massimo warrior UTV SxS 1000mx with 600 miles on it. I didn't even get a full day of riding and the driver's side rear axle broke. I'm pretty sure it was already going bad because we would hear a noise once in a while. I'm wondering if anyone else has had problems with theirs. Also looking for places to buy accessories.
×
×
  • Create New...