Quantcast
Jump to content


Audio Systems

Valhalla

By Valhalla
in UTV General Discussion

 Share

Recommended Posts

Valhalla Newbie

Valhalla

Posted
Posted

Evening everyone, I am wanting to solicit some information from everyone about audio systems for UTVs. There is so much out there, I would like to hear from people who already have speakers installed. The system will be for a General XP4 1000, 4 seater. Thanks.

DigitalDan Contributor

DigitalDan

Posted
Posted

I'm using an outdoor bluetooth speaker mounted overhead on the cross member. The internal battery lasts about 2 hours at high volume, but I can also power it from the UTV if I want to run a wire.  I was planning to wire it into the electrical, but haven't really needed to yet.  Everything I listen to is on my phone... music, podcasts, etc; and I already happened to have the speaker.  It was a quick and easy way to get a sound system going, and it has worked well for about 5 years now.

kenfain Experienced

kenfain

Posted
Posted

I looked at installing a fixed system. I didn't like the cost, vs. performance. Not to mention the hassle of installation. Instead I went with a W-King X10 powered bluetooth speaker. Along with a soft mount, that makes it easily removable.

    It's about a hundred bucks for the speaker and the mount. Speaker performance is similar to the over $300.00 JBL speaker.

Total install time was about six minutes. 

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Similar Topics

    • ToughLuck
      2021 Massimo MXU 1000 Runs Rich
      By ToughLuck
      I have a 2021 Massimo MXU 1000.  Last winter the front drive shaft sheared off inside the motor and it was cheaper to buy a new motor than to take it apart in order to remove the front drive shaft that was broken inside the case…
      Now it is running rich, seems to maybe be geared too high, does not accelerate well once you hit about 28mph.  I’ve replaced the O2 sensor.  MAF is next (I accidentally ordered the wrong one, but when I removed the old one you can clearly smell fuel).  
       I’m not a motorhead but I can turn a wrench.  Any ideas how to get this motor optimized?  The motor has about 300 miles on it.  I broke it in as recommended in the manual. 
    • lincolnsq175
      Are there any performance parts for ut400?
      By lincolnsq175
      Ive searched and cannot find any performance parts that fit my machine.
      I have a 2020 coleman ut400.
      Im looking for machined sheave kit, programmers, cdi, exhaust and intake.
      I know these are yamaha rhino clones but are they rhino 450 clones?
       
      Any info is appreciated.
    • Bloodhound
      2015 Odes 1000
      By Bloodhound
      Any options on this machine 
    • CRV
      Hello .. I have a 2007 cub cadet big country
      By CRV
      I’m need a couple parts. Diff. Lock Actuator mainly. But I would like to find a donor that maybe has bad motor or something along those lines. 
      if anyone has or knows of anything please holler at me 
      thanks Randy 
    • CRV
      Need some help. Looking for some parts too
      By CRV
      Howdy new member here . My hobby's Rabbit dogs , gamefowl . I'm retired from my real job but I stay busy with the hounds and gamefowl . So to help around the farm I ran across an old 2007 CC Big Country 4x2 to haul feed , water , sprayer and my sorry a$$ .It is in pretty good shape , 781 hrs. good plastic , tires, ect. . But as anything outside and 18 years old it needs seats ! The thing I have found wrong mechically the Diff. Lock Acturtor is broken where it mounts to the bracket ( partly why Im here ) . Hoping someone here can help  ! Just my wish list but Id like to find a roll cage and a composit/plastic top for it Im thinking I'll need a donor to salvage these things from ( again partly why Im here ) .Is there another brand that uses this same actuator? If anyone reads this and has or knows of any of threse parts PLEASE HOLLER !! 
      Again Howdy brothers & sisters

UTV FORUMS

MORE SECTIONS

FOLLOW US ON

GET IN TOUCH

  • Automotive Webmaster
×
×
  • Create New...