Seat belt by-pass switch

[Roadstar515]

Does anyone know of a bypass switch or controller. They make one for Polaris which installs into the harness that makes the ECU think it’s hooked up in normal position allowing vehicle to operate normally as if you are wearing seatbelt.

[Osney]

I've just pulled the passenger side clip over and pushed it into the driver's seatbelt fastener. I rarely have a passenger, so it's not much of a problem for them. Alternatively you can buy a bare clip that slots into the fastener and fools it into thinking the seatbelt's fastened.

Not wearing the seatbelt is obviously done at your own risk! Here in the UK it's technically breaking the law to do so on while driving the vehicle on the public road.

[aefron88]

You can either get a buckle end to plug in or rewire it to bypass.

There is a 3d printing file for the buckle end in the files section if you have a 3d printer. I did see a thread on either the hisun or coleman forum that someone found a comparable buckle end you could buy for a few dollars on amazon (do a search, it was older).

The other option is to disconnect the connector under the seat, and connect the two wires in the plug together, which will fool ecu into thinking the belt is always buckled.

[Don W]

I can’t imagine not wearing the seatbelt the way I drive

[Osney]

  On 8/9/2022 at 6:34 PM, Don W said:

I can’t imagine not wearing the seatbelt the way I drive

Expand  

Mine is the Sector E1 electric, which isn't particularly fast and struggles on hills. I use it as a farm vehicle for checking livestock and carting feed, for which is serves admirably (the Highland cows also like to use it as a scratching post). The seatbelt alarm is a pain when you've opened a gate and are driving through it before stopping, climbing out and closing it behind you. I quite agree that for any spirited driving the seatbelt is your friend.

[Roadstar515]

  On 8/9/2022 at 6:38 PM, Osney said:

Mine is the Sector E1 electric, which isn't particularly fast and struggles on hills. I use it as a farm vehicle for checking livestock and carting feed, for which is serves admirably (the Highland cows also like to use it as a scratching post). The seatbelt alarm is a pain when you've opened a gate and are driving through it before stopping, climbing out and closing it behind you. I quite agree that for any spirited driving the seatbelt is your friend.

Expand  

Here is what I was going to use on Polaris but didn’t purchase. I don’t know if this would work on Hisun or if the plug any is like Polaris. Don’t know where to plug it in if is

[aefron88]

Something like that will work i you can find the right size plug. They are litterally just a matching plug with a wire that runs between the two terminal also. You could do the same thing with a straightened paperclip and some electrical tape if you want.

The plug is under where the seat belt female part is, you can see the wires running down into the seat gap. Flip up the bed and follow the wires coming down from it.

[TapBoss]

That bottle opener one looks alot like the one in the 3D file in downloads.  

[Roadstar515]

  On 8/9/2022 at 11:58 PM, aefron88 said:

Something like that will work i you can find the right size plug. They are litterally just a matching plug with a wire that runs between the two terminal also. You could do the same thing with a straightened paperclip and some electrical tape if you want.

The plug is under where the seat belt female part is, you can see the wires running down into the seat gap. Flip up the bed and follow the wires coming down from it.

Expand  

Okay, I’ll look for it and see what the plug looks like, thanks! Have another issue with drain plug leaking from day one when purchased but will open up another thread to discuss

[Roadstar515]

  On 8/10/2022 at 10:54 AM, TapBoss said:

That bottle opener one looks alot like the one in the 3D file in downloads.  

Expand  

[Roadstar515]

  On 8/10/2022 at 11:27 AM, Roadstar515 said:

Okay, I’ll look for it and see what the plug looks like, thanks! Have another issue with drain plug leaking from day one when purchased but will open up another thread 

Expand  

[TapBoss]

Racking my brain to remember who posted the clip they found on Amazon.  It was one of the guys that's been around for awhile but he hasn't been on very much the past few months.  I believe he had a Coleman (made by Hisun) so it's probably in one of those.

[Roadstar515]

  On 8/10/2022 at 11:53 AM, TapBoss said:

Racking my brain to remember who posted the clip they found on Amazon.  It was one of the guys that's been around for awhile but he hasn't been on very much the past few months.  I believe he had a Coleman (made by Hisun) so it's probably in that forum, or maybe general discussion.

Expand  

That would be awesome if he would chime in for sure. I know everyone has a concern about wearing seatbelts and I do in car and truck. This machine is basically for running around the neighborhood on asphalt. This will never see off road or jumping hills etc. I bought it due to gas power golf cart doesn’t have enough a$$ to go up and down the mountain hills where we live in Georgia mountains. Thanks for chiming in on this topic.

If anyone knows of the correct clip to purchase, please let me know. I don’t want to cut wires or scotch lock connect perfectly good wiring. It will cause problems down the road.

[TapBoss]

I did find a post from cliffyk, but it was a 3d printer file.  But he had pics and they were similar to that bottle opener one.  A quick Amazon search and I found this:

https://www.amazon.com/dp/B07FNZR5XM/ref=sspa_dk_detail_0?pd_rd_i=B07HKSBCG3&pd_rd_w=TB0mJ&content-id=amzn1.sym.3481f441-61ac-4028-9c1a-7f9ce8ec50c5&pf_rd_p=3481f441-61ac-4028-9c1a-7f9ce8ec50c5&pf_rd_r=37C9RACD36HQ072VQ8GC&pd_rd_wg=utAYX&pd_rd_r=f11fa40c-a191-48a4-b9e1-db9c98fdc04a&s=automotive&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE1WDg1OVFJV1BRNDUmZW5jcnlwdGVkSWQ9QTA0MTU0ODUxNDVLN0U0VTJIOFA1JmVuY3J5cHRlZEFkSWQ9QTAzMDI0OTUxTkJBMUFSV1NMRktZJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

 

[Roadstar515]

  On 8/10/2022 at 12:20 PM, TapBoss said:

I did find a post from cliffyk, but it was a 3d printer file.  But he had pics and they were similar to that bottle opener one.  A quick Amazon search and I found this:

https://www.amazon.com/dp/B07FNZR5XM/ref=sspa_dk_detail_0?pd_rd_i=B07HKSBCG3&pd_rd_w=TB0mJ&content-id=amzn1.sym.3481f441-61ac-4028-9c1a-7f9ce8ec50c5&pf_rd_p=3481f441-61ac-4028-9c1a-7f9ce8ec50c5&pf_rd_r=37C9RACD36HQ072VQ8GC&pd_rd_wg=utAYX&pd_rd_r=f11fa40c-a191-48a4-b9e1-db9c98fdc04a&s=automotive&sp_csd=d2lkZ2V0TmFtZT1zcF9kZXRhaWxfdGhlbWF0aWM&spLa=ZW5jcnlwdGVkUXVhbGlmaWVyPUE1WDg1OVFJV1BRNDUmZW5jcnlwdGVkSWQ9QTA0MTU0ODUxNDVLN0U0VTJIOFA1JmVuY3J5cHRlZEFkSWQ9QTAzMDI0OTUxTkJBMUFSV1NMRktZJndpZGdldE5hbWU9c3BfZGV0YWlsX3RoZW1hdGljJmFjdGlvbj1jbGlja1JlZGlyZWN0JmRvTm90TG9nQ2xpY2s9dHJ1ZQ&th=1

 

Expand  

So do you think this will work? I guess it’s cheap enough to try

[TapBoss]

There are reviews mentioning about every auto manufacturer and it working, and that was my thought with the price.  I'd order one for my work truck if the dinger wasn't already modified.

[Roadstar515]

LoL, well I ordered two not knowing if passenger is required or not. Will,see what happens. Thanks for the info on that.it will make it easier to go back when needed without going under seat to disconnect.

[kenfain]

Mine doesn't have that feature, since it's an older machine. But at work, all the forklifts, regardless of brand, have to be buckled, or the obnoxious alarm won't ever stop. So I just leave it buckled behind the seat. Problem solved. Maybe you could do the same, with yours?

[Roadstar515]

  On 8/10/2022 at 12:22 PM, Roadstar515 said:

So do you think this will work? I guess it’s cheap enough to try

Expand  

Just latched up with new seat belt (let’s call it a key), and it fits just like seat belt lock. Just fyi, you only need drivers side to deactivate system cause passenger side is a different size and not needed.

 

thanks again for the lead on this

[TapBoss]

Glad it worked out!