Quantcast
Jump to content


Recommended Posts

Posted

Hi guys.  I recently purchased a pre-owned Massimo MSU500.  It has a few small issues that I am working on, however, I have very little information on this UTV.  The guy that sold it to me said it was a 2004 year model.  I don't even think Massimo existed in 2004, so, I don't think that is correct.  I contacted Massimo Motors customer support and provided them the VIN number and some photos of the machine, but, they said they have no record of that VIN and couldn't help me.  I find it ridiculous that the manufacturer cannot help with their own machine.  Does anyone know of any other way to find info for this machine.  I need to know the year model in order to find the correct parts.  I can attach additional photos if that will help. Thanks in advance.

20?? Massimo MSU500

VIN # LWGMDTZ40EB000346

IMG_20220808_101539.jpg

IMG_20220808_101644.jpg

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now
  • Similar Topics

    • By A P
      Hi
      I have a 2022 hisun sector eps 550. 30amp fuse is blown for eps. Checked the motor and it’s fine. Opened up the controller and found a bad diode. Dealer wanted 500$ for the controller. Just posting this in case it helps someone. I couldn’t read numbers from the old one so just took a guess and replaced it with a 100v 3amp diode. 
    • By Dennis
      I have  a bulldog i bought from home depot in 2013.  In the last season it started refusing to shift from neutral to either forward or reverse.  I changed the trans axle fluid and made sure the cables were lubricated and free.  With a lot of coaxing, I can sometimes get it to shift.  once I start driving it, things improve until I let it set awhile.   Any suggestion on where to go from here?
    • By mark walkom
      the regen braking on my e1 has stopped working unless (for eg) I am going down a hill in low and it's slowing things down to stick to the 10kph limit. when I drive and take my foot off the accelerator it's not initiating the regen to slow things down and instead just coasts at whatever speed it is at, or speeds up as the regen is not limiting it. the brake lights work, so it's probably not a fault with the sensor on the brake pedal
       
      hoping someone else might be able to provide some suggestions on things to check, as the mob that I bought it off seem to have gone silent on me
    • By Polish DIY Lover
      Hi i'm jakub and i making DIY UTV. Some questions?
    • By shawn b
      my hisun died on me while driving it started losing power then stalled. it wants to start but wont . it didn't over heat. I replaced plug,fuel filter injector, and fuel pump.put code reader on it and says no codes. have any ideas possibly sensor? Any input on what it could be would be appreciated
×
×
  • Create New...